This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Tapo C200 PTZ now working with HomeAssistant
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The Tapo C200's PTZ function is now unofficially supported by HomeAssistant. See: https://github.com/JurajNyiri/HomeAssistant-Tapo-Control
Unfortunately, this still leaves those of us who use NVRs out of luck, no PTZ for us.
There aren't many ways to interpret this issue from a PR perspective: Because of TP-Link's bad behavior around the limited ONVIF support of this camera, users have seen themselves forced to reverse engineer their work in order to force it to perform as they (falsely) advertised. Think of how badly this reflects on the company.
As a user of your products for the last 14 years, I am now considering looking elsewhere for my networking solutions, and I am obviously not alone in this. Look at these forums. Look at the number of threads asking for this camera to have PTZ support over ONVIF. Are you saying your customers were wrong in thinking ONVIF support meant PTZ as well? I say this in hopes of being helpful: Now that hackers are adding PTZ support for your C200 to software like HomeAssistant, there's simply no excuse for you NOT to support PTZ over ONVIF anymore. If they can do it, your engineers most certainly can, and with much more ease. Instead of solving the issue (and let's be honest here, one of your engineers can solve this in a day and they know it), every user here is now aware that this is a conscious software design choice on your part.
It looks more and more like you're choosing to spite your long term customers (such as myself) with false advertising and an exceedingly capricious stance on the issue.
Keep us as your customers, TP-Link. Add PTZ to the ONVIF spec of this camera. Ask your salesmen. The C200 is ONE crucial feature update away from being a killer product. Are you gonna let it fall flat on its face? Hackers are doing your job better than you. Don't you have any pride in your products?
Up until today, I've thought you were one of the most reasonable companies, TP-Link. We'll be waiting for the firmware update. Please don't let us down. I'm too old to start dating again.
@Solla-topee I think you guys really should write a guide on how to configure the ONVIF
It took me ages to "guess" how to configure in Agent DVR \ Ispy and actually it didn't need to be so painful
I turns out when configuring Agent DVR or ISPY its important to pick ONVIF as the source type.
Otherwise the PTZ does not work
The URL I used was completely wrong but still allowed streaming.
It should have been http://192.168.1.238:2020/onvif/device_service
Working Video Source configuration: (with username:password) removed
Working PTZ configuration
@Solla-topee Thank you.
I updated the firmware and PTZ now works with Home assistant, however it does not work with AGENT DVR
Agent DVR is getting the video stream however its not connecting to the PTZ function:
| 13:24:57 | Connection Factory: Connection Factory: No connection could be made because the target machine actively refused it 192.168.1.238:80 |
| 13:24:57 | Error: Connection Factory: Connection Factory: No connection could be made because the target machine actively refused it 192.168.1.238:80 |
| 13:24:57 | Connection Factory: at System.Net.Sockets.Socket.InternalEndConnect(IAsyncResult asyncResult) at System.Net.Sockets.Socket.EndConnect(IAsyncResult asyncResult) at System.Net.ServicePoint.ConnectSocketInternal(Boolean connectFailure, Socket s4, Socket s6, Socket& socket, IPAddress& address, ConnectSocketState state, IAsyncResult asyncResult, Exception& exception) |
I don't think I need to configure anything as it uses the same URL as the video stream? or do I ?
Settings I can configure are as follows:
I tried these settings but it didn't work either:
I tried port 2020 and 554
The camera has a static IP set on my router 192.168.1.238
The camera account option has been configured
@Solla-topee I think you guys really should write a guide on how to configure the ONVIF
It took me ages to "guess" how to configure in Agent DVR \ Ispy and actually it didn't need to be so painful
I turns out when configuring Agent DVR or ISPY its important to pick ONVIF as the source type.
Otherwise the PTZ does not work
The URL I used was completely wrong but still allowed streaming.
It should have been http://192.168.1.238:2020/onvif/device_service
Working Video Source configuration: (with username:password) removed
Working PTZ configuration
