HS210 not connecting to Wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

HS210 not connecting to Wifi

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
HS210 not connecting to Wifi
HS210 not connecting to Wifi
2018-12-18 04:59:16

I purchased a set of HS210s for a 3 way switch config.  I am only using one as I have read pretty much everywhere you only have to use one.  The switch will work by pressing the button on the wall but when I run through the setup it will not join to my wifi.  After the config is done it tries to do a firmware update and fails.  As long as I stay connected to the switches wifi I can turn it on and off from the app but if I try to turn remote access it does nothing.   Any ideas?

 

Thanks 

  0      
  0      
#1
Options
5 Reply
Re:HS210 not connecting to Wifi
2018-12-18 08:57:29
Check firmware version. See if there is available firmware update https://www.tp-link.com/en/faq-2325.html
  0  
  0  
#2
Options
Re:Re:HS210 not connecting to Wifi
2018-12-19 00:56:14

There is a firmware update, but that is the problem.  I try to download the firmware during the setup process and it fails.  Also, while I am still in the app I can go into the settings and try the firmware update there and it fails as well.  So, is there any other way to update the firmware other than through the app?  Or should I send this back and get another set?  I should mention I have several other TP-Link smart switches that work perfectly fine.  The HS210 is the only one giving me issues. 

  0  
  0  
#3
Options
Re:Re:Re:HS210 not connecting to Wifi
2018-12-20 00:19:04
Maybe try the other switch that came in the hs210 kit?
  0  
  0  
#4
Options
Re:Re:Re:HS210 not connecting to Wifi
2018-12-20 11:17:30

Reset it, try again.

 

You can contact tplink tec support to get some advice.

  0  
  0  
#5
Options
Re:HS210 not connecting to Wifi
2019-02-06 01:26:45

I ran into the same problem i think. Let me guess, your network is hidden? I have a hidden SSID and couldnt get the switches to connect. As soon as I unhid my network they joined no issues... when I hid my network again, poof no longer had control of the HS-210. I guessing they need a firmware update to fix.

 

I'll pull them out if i cant get a proper resolution for this....

 

Did you try TP support? I might try them tomorrow.

  0  
  0  
#7
Options

Information

Helpful: 0

Views: 3403

Replies: 5

Related Articles