How to use the Pan & Tilt function of the Tapo cameras on the Tapo app

Released On: 2024-09-17 09:04:07Last update time: 2024-09-17 09:05:21

The following steps will guide you in setting up the Pan & Tilt feature on the Tapo cameras.


Note: Only Pan/Tilt cameras have this feature. 


Step 1.

After setting up your Tapo camera successfully, tap the camera card on the Tapo app > Home tab to enter its Live View page.


Step 2.

Tap the Pan & Tilt icon to enter the control page.


1) On the Pan/Tilt page:
    a. Tap the arrows on the steering wheel, the camera's lens will move up, down, left, or right.
    b. Tap the icon at the top right corner, the feature sets how many degrees the camera will move per tap of the Pan & Tilt, and the feature Pan & Tilt Correction will show up.


2) On the Patrol page, click Vertical Patrol or Horizontal Patrol will make the camera patrol vertically or horizontally once.


3) If you see a Pano page, refer to this article for more information.


4) Tap the Add icon on the bottom page to mark your current position. When the camera lens moves to other positions, tap the marked position once will quickly rotate the camera to that position.


For detailed instructions, please refer to the article: How to use the Pan & Tilt function of the Tapo cameras on the Tapo app
 

0
Comment
upload
    upload