Tapo Outdoor Pan/Tilt Wi-Fi Camera
I successfully installed, set-up the camera and all was working well. 1 day later the automatic Pan and Tilt operation has stopped. I can manually Pan and Tilt from my phone but it will not automatically track and follow a subject. the camera does recognise a subject and notifies me through my Wi-Fi to my phone.
Any help would be greatly appreciated, thanks in advance.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Try to reboot the camera. If it doesn't help, reset and reconfigure the camera.
How to set up the Tapo camera
- Copy Link
- Report Inappropriate Content
Many thanks @Wayne-TP
I have now Reset and re-configured including a re-boot, now all seems to be working again.
Exactly why it suddenly became a problem is still a mystery!
once again thanks for your help
- Copy Link
- Report Inappropriate Content
Check whether the motion tracking and motion detection features are still turned on.
Does the camera move if you perform a Pan & Tilt correction (camera Device Settings > Pan & Tilt.)?
- Copy Link
- Report Inappropriate Content
yes it does work on pan and tilt correction but still will not follow subject.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Try to reboot the camera. If it doesn't help, reset and reconfigure the camera.
How to set up the Tapo camera
- Copy Link
- Report Inappropriate Content
Many thanks @Wayne-TP
I have now Reset and re-configured including a re-boot, now all seems to be working again.
Exactly why it suddenly became a problem is still a mystery!
once again thanks for your help
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 69
Replies: 5
Voters 0
No one has voted for it yet.