My C210 switches to night mode on and off endlessly

My C210 switches to night mode on and off endlessly

My C210 switches to night mode on and off endlessly
My C210 switches to night mode on and off endlessly
a week ago
Model: Tapo C210  
Hardware Version:
Firmware Version:

Hi

Tried to search within the forum but could not find the problem similar to mine.

Bought mine in Oct 2022. Work fine until now and it happens suddenly.

 

At first, I noticed that my camera can't be pan/tilt. When I do that, it will stop working, and starts to act strangely. The LED will blink red/green. Starts to switch to night mode. And reconnects to the Wifi for a while. It will repeat this sequence non stop. I have to turn it off and on again so it will back to normal.

That was before. And now the loop is endless. I tried to reset it but won't reset properly. No sound saying "reset successful". The camera won't auto rotate as it supposed to be doing when we reboot/reset. The night mode switching and clicking sound continues endlessly. Also, it has this strange ringing sound within the camera. Soft ringing sound

 

I can't check the FW. I think its the latest one. Not sure though.


Please help guys. I'm stuck.

  0      
  0      
#1
Options
1 Reply
Re:My C210 switches to night mode on and off endlessly
a week ago

  @MazaMajid 

Hi,
1. Please try to turn off the camera, wait for two minutes, turn it back on, and wait for another two minutes.
2. Try to press the reset button on the camera for 10 seconds to factory reset it, and check if the LED on the camera will change and then always flash red and green. If so, you can try to configure the camera and check if it will work.
Best Regards

  0  
  0  
#2
Options