Smart Home Community > Tapo Smart Camera > Tapo
< Tapo Smart Camera

Tapo

Tapo

Tapo
Tapo
2025-02-08 19:00:13 - last edited 2025-03-02 09:38:15
Tags: #Installation #TD25
Model: TD25  
Hardware Version:
Firmware Version: 1.6

HVIN: Tap D235  Tapo TD25

Install several months ago went like a charm -- no problems.  Now I've changed routers and have been trying to find the directions, but no matter what I do the indicator light only flashes red -- never the alternating red/green as shown in the directions.  I've made sure the device is well charged and I do hear messages like "power on" and "power off", but the light still blinks red no matter what I do.  How should I proceed?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Tapo-Solution
2025-02-12 08:17:46 - last edited 2025-03-02 09:38:15

  @BlueGrits 

 

If there is an sd card, remove it and try to do the reset again. If the problem still exists, this device needs to be replaced, you contact the local support team to proceed with the warranty.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ Tapo Auto Biorhythm Turn on light bulb at different lighting to match different times of the day
Recommended Solution
  0  
  0  
#4
Options
3 Reply
Re:Tapo
2025-02-10 09:10:45

  @BlueGrits 

 

Did you reset the doorbell? Press and hold the SYNC/RESET button for about 5s, the doorbell is resetting when the led indicator turns to blinking red quickly. 

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ Tapo Auto Biorhythm Turn on light bulb at different lighting to match different times of the day
  0  
  0  
#2
Options
Re:Tapo
2025-02-10 14:44:42

  @Wayne-TP Yes, I've repeatedly tried the reset without effect.  I did find a post/note elsewhere that holding it down for 10s might also reboot, but that didn't work either. The device has been blinking orange now for over 24hrs.

  0  
  0  
#3
Options
Re:Tapo-Solution
2025-02-12 08:17:46 - last edited 2025-03-02 09:38:15

  @BlueGrits 

 

If there is an sd card, remove it and try to do the reset again. If the problem still exists, this device needs to be replaced, you contact the local support team to proceed with the warranty.

▶ Smart HomeBase Tapo H500 - Even More Powerful Smart Hub ▶ Tapo Auto Biorhythm Turn on light bulb at different lighting to match different times of the day
Recommended Solution
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 189

Replies: 3

Tags

Installation
TD25
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.