KE100 Batteries
Put the supplied batteries in the new thermostat correctly.
Within 6 hours I get a low battery indication.
Any idea what is wrong ?
TIA
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Necessiter thank you. I followed this. Fixed one and improved battery level on another. I have reached out to support via form in the app
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Are you referring to the KE100 heads firmware? All mine are showing 2.8.0. There isn't any option for a manual firmware upgrade on the app
- Copy Link
- Report Inappropriate Content
No not the heads firmware.
That is the hub firmware.
I was sent a link to update it by support on here.
- Copy Link
- Report Inappropriate Content
Weird... I've been sent that too, but my hubs (KH100) are showing 1.5.23 (no build info)
- Copy Link
- Report Inappropriate Content
As we've not yet known what might be the cause of the problem discussed in this thread, if any user encounters similar issues, you may join the discussion with the following information, or post a new thread instead. Detailed information will be helpful in analyzing the problem and pinpointing the roof cause.
1. Type of battery used/replaced.
2. A picture of the error.
3. Hardware and firmware version of the KE100.
4. Kasa app version.
5. Detailed description of the problem phenomenon you observed, the troubleshooting steps you've tried and the results.
- Copy Link
- Report Inappropriate Content
@Wayne-TP I have the same issue.
1. Type of battery used/replaced.
Alkaline LR6 AA batteries (VARTA)
2. A picture of the error.
The battery icon on the valve is blinking.
3. Hardware and firmware version of the KE100.
Hardware: 1.0
Firmware: 2.8.0
4. Kasa app version.
3.4.101
5. Detailed description of the problem phenomenon you observed, the troubleshooting steps you've tried and the results.
- Reinstalling the valve and readding to Kasa app
- Switching batteries
- Moving the hub closer to the valve
- Copy Link
- Report Inappropriate Content
herr_bones wrote
@Wayne-TP I have the same issue.
1. Type of battery used/replaced.
Alkaline LR6 AA batteries (VARTA)
2. A picture of the error.
The battery icon on the valve is blinking.
3. Hardware and firmware version of the KE100.
Hardware: 1.0
Firmware: 2.8.0
4. Kasa app version.
3.4.101
5. Detailed description of the problem phenomenon you observed, the troubleshooting steps you've tried and the results.
- Reinstalling the valve and readding to Kasa app
- Switching batteries
- Moving the hub closer to the valve
Please contact the local TP-Link support team for assistance. This device might require testing.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1381
Replies: 28
Voters 0
No one has voted for it yet.