Smart Home Community > Tapo Smart Camera > Notifications from camera in "Away Mode" device list while in "Home Mode"
< Tapo Smart Camera

Notifications from camera in "Away Mode" device list while in "Home Mode"

Notifications from camera in "Away Mode" device list while in "Home Mode"

Notifications from camera in "Away Mode" device list while in "Home Mode"
Notifications from camera in "Away Mode" device list while in "Home Mode"
Friday - last edited Yesterday
Model: Tapo C200  
Hardware Version: V3
Firmware Version: 1.3.15

Hi,

 

I have two cameras Cam1 and Cam2.

 

Cam1 and Cam 2 are in "Away Mode" device list and only Cam1 is in "Home Mode" device list.

 

When in Home mode, I get the notifications from Cam2 as well.

 

Am I missing some setup? Or it is by design?.

 

 

 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Notifications from camera in "Away Mode" device list while in "Home Mode" -Solution
Yesterday - last edited Yesterday

  @leepan8 

Note to self:

All the cameras must be in both list. Notification/Detection/Alarm (NDA) settings must be set appropriately depending on expected behavior in the mode (Home/Away). If a camera is not in a list, it retains the NDA settings of the last mode it was set.

  

Recommended Solution
  0  
  0  
#2
Options
4 Reply
Re:Notifications from camera in "Away Mode" device list while in "Home Mode" -Solution
Yesterday - last edited Yesterday

  @leepan8 

Note to self:

All the cameras must be in both list. Notification/Detection/Alarm (NDA) settings must be set appropriately depending on expected behavior in the mode (Home/Away). If a camera is not in a list, it retains the NDA settings of the last mode it was set.

  

Recommended Solution
  0  
  0  
#2
Options
Re:Notifications from camera in "Away Mode" device list while in "Home Mode"
Yesterday

 

leepan8 wrote

  @leepan8 

Note to self:

All the cameras must be in both list. Notification/Detection/Alarm (NDA) settings must be set appropriately depending on expected behavior in the mode (Home/Away). If a camera is not in a list, it retains the NDA settings of the last mode it was set.

  

@leepan8 Hi, this is correct. yes  However, if you go to the camera's Device Settings page to change the notification/Detection/Alarm settings manually, the new configuration will overwrite the old settings, but won't change the settings on the Home/Away mode.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#3
Options
Re:Notifications from camera in "Away Mode" device list while in "Home Mode"
23 hours ago

  @Solla-topee 

 

Initially, I thought that there were 3 modes: Default/Home/Away. 

 

When a camera is in the Home or Away Device list, the notification/Detection/Alarm setting is set to the programmed setup for that mode, otherwise it is in the Default mode (which is the setting programmed from the camera's device settings). This can be a good feature to have.

  0  
  0  
#4
Options
Re:Notifications from camera in "Away Mode" device list while in "Home Mode"
3 hours ago

  @leepan8 Thank you for your support of our cameras.

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 53

Replies: 4

Related Articles
Camera offline away from home
128 0
Camera always sends notifications
956 0
can we record the settings on the away mode?
675 0
 Why is there no option to only get notifications when you are away all automatic?
405 0
 Is there no way to only get notifications when away from home?
343 1
 Camera notifications to more than one device
1194 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.