@Wayne-TP Is the fix available in  the following update or still in beta ?

  @Wayne-TP Got it. So this is for the spotlight only. I see that the color light around the button is always on, is this an expected behavior ?

  @Wayne-TP Hi, so my nightmode is set to doorbell on my D235, and the LED setting to Auto, but the spot light still doesnt turn off when hardwired?  Is this expected behaviour for the LED setting in Auto and hardwired?

When not hardwired the spot light behaves as stated in the AUTO setting and turns off.

Im on the latest firmware (as posted above 1.1.16) 

Wayne-TP wrote

 

How's the spotlight turned on in the first place? Did you stand in front of it? Note that the spotlight will also turn on when movement is detected or watching the liveview.

  @Wayne-TP  First time - only when wiring the door bell.  From that point on its on constantly, day or night. 

Wayne-TP wrote

  @J1PL 

 

Are you able to turn it off through the liveview page? After the light is turned off, try to trigger it again then monitor whether the light will turn off automatically later.

 

If your doorbell is not in the Always-on mode, the way to perform tests is different:

1. If the wake-up setting is 'event detected': wake up the doorbell by moving in front of the doorbell.

2. If the wake-up setting is 'doorbell pressed': press the doorbell.

 

After the doorbell spotlight turns on, step out of the doorbell's camera range, and be sure not to open the camera live page on your phone during this time. Then, observe for a while (approximately 2-5 minutes) to see if the spotlight will automatically turn off.

  @Wayne-TP   Hi, Ive had another firmware update since (ver 1.1.19) and done the following test: 

1. During the day checked through liveview page the spot light setting is off but the LED is lit always.  Ive turned the spot light on and can see the light intensity change.  the intesity of the light turns down when I turn off the spot light in liveview.  The LED light stays on constantly even if no trigger events are present is this normal behaviour? 

2.  During the night the LED light is on constantly and the door bell setting doesnt impact this. The spot light intensity doesnt change on triggers.  So I have full colour recording when set night mode to doorbell mode.  I've checked through the night recording and its full colour no matter the time of night.   But setting night mode on the camera to infrared mode records in black and white but the LED is lit consantly.   

My settings are 

LED = Auto

Night mode setting = Doorbell mode

Always on mode = On