Smart Home Community > Tapo Smart Camera > Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours
< Tapo Smart Camera

Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours

Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours

Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours
Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours
2 weeks ago - last edited a week ago
Tags: #Device Connectivity #Wifi issue
Model: Tapo C520WS  
Hardware Version: V1
Firmware Version: 1.2.8

Hi, the camera was working fine, now it's losing connection and blinking red after a few hours. It also appears as disconnected on the tapo app.

 

I have a tp link ax55 router and every other device (not that I have too many connected) works fine.

 

To quickly fix it I have to replug the power adapter, it will work for a few hours and then it will disconnect from wifi again.

 

I tried resetting twice, first deleting the device from the app and readding it and nothing, second time I presed the reset button on the camera for 10s for a factory reset. Issue is still there.

 

Tried changing channels setting on my router and nothing, I even tried the "IoT network" that wasn't being used on my router and still nothing. Everything just works for a few hours then goes offline.

 

Is there a solution for this, or is my device faulty?

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours-Solution
2 weeks ago - last edited a week ago

  @KAFE 

Hi,
Typically, you can refer to the instructions below to troubleshoot the offline issue.
What should I do if my Tapo smart device keeps losing connection or going Offline?
 

If the problem remains, please confirm the following information.
  1. When the camera is working, please go to the Tapo app > camera's Device Settings > Device Info page, tap the Wi-Fi icon, and send me the RSSI value.

  2. Ensure the router's 2.4G Wi-Fi name is different from the 5G. If they are the same, change the 2.4G or 5G Wi-Fi name for a try.

  3. Try to enable a hotspot Wi-Fi on your phone or enable the Wi-Fi on another router if you have one, factory reset the camera, reconfigure it, connect it to the new Wi-Fi network, and check if it will work.

  4. When did you buy the camera? 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#2
Options
3 Reply
Re:Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours-Solution
2 weeks ago - last edited a week ago

  @KAFE 

Hi,
Typically, you can refer to the instructions below to troubleshoot the offline issue.
What should I do if my Tapo smart device keeps losing connection or going Offline?
 

If the problem remains, please confirm the following information.
  1. When the camera is working, please go to the Tapo app > camera's Device Settings > Device Info page, tap the Wi-Fi icon, and send me the RSSI value.

  2. Ensure the router's 2.4G Wi-Fi name is different from the 5G. If they are the same, change the 2.4G or 5G Wi-Fi name for a try.

  3. Try to enable a hotspot Wi-Fi on your phone or enable the Wi-Fi on another router if you have one, factory reset the camera, reconfigure it, connect it to the new Wi-Fi network, and check if it will work.

  4. When did you buy the camera? 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
Recommended Solution
  0  
  0  
#2
Options
Re:Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours
a week ago - last edited a week ago

  @Solla-topee 

I have the same problem, got my new TAPO C520 WS last 3 months and for the first month it worked perfect on the same spot where now I am unable to get it connected to the internet.

The Wired connection works perfect, but wireless keeps disconnecting and every time I have to climb up and disconnect power for a reboot to get it back online. This is ridiculous !!

 

I have other TAPO cameras such as TAPO C320WS and they work perfect. I have different SSID for 2.4Ghz and 5Ghz and all my TAPO cameras are on 2.4ghz.

 

Let me give you the RSSI 

 

C320WS -67 (Works fine) -- Connected to Xtender RE450

C320WS -79 (works fine)  Connected to Xtender RE450

C320WS -55(works fine) Connected to Xtender RE300

C520WS -71 (does not work) Connected to Main Router C1200

 

Nothing has changed in the last couple of years on the network. The C520WS was working fine for more than a month and then the issue began. No firmware update pending.

  0  
  0  
#3
Options
Re:Tapo C520WS, working fine for a week and now it disconnects from wifi after a few hours
Tuesday

  @HostNotFound 

Hi,
The signal strength of the Tapo C520WS is weak. If it's away from the router, can it be connected to a range extender's Wi-Fi to get better signal strength and then check if it will work fine?
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#4
Options

Information

Helpful: 1

Views: 164

Replies: 3

Tags

Device Connectivity
Wifi issue
Related Articles
Problem with Tapo c520ws connection
570 0
Tapo C520ws
3233 0
Patrol Mode is not working on my Tapo C520WS
400 0
TP-LINK Tapo C520WS
558 0
"This smart device can only be controlled locally" - On single C520WS, other works fine.
242 0
 Tapo c520ws camra not working
364 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.