Solution Disable NAT on Omada Router
This Article Applies to:
Certain Omada models.
Issue Description/Phenomenon:
In certain situations, especially, ISP provides a modem-router and intends to disable the NAT to eliminate the double-NAT problem.
Available Workarounds/Solutions:
Our team has developed an early firmware version to address the issue mentioned above.
Disable NAT function is developed on the recent firmware release:
For ER706W V1 based on 1.0.4, download here;
ER7206 V2 based on 2.1.2, download here.
More to come this month:
ER605 V2 based on 2.2.6, download here.
ER7206 V1 based on 1.4.2;
ER8411 V1 based on 1.2.2, download here.
Note:
1. The firmware above only applies to the standalone mode.
2. Please be advised that if there are any delays or cancellations in the development progress, we will not provide notifications or explanations. Additionally, we do not offer any guarantees to their release before the actual development of firmware has been finished. For information on the final outcome, please refer to future updates on this thread.
3. For other models, the official fix/solution will be included in the upcoming V5.15.X Omada Controller and its associated firmware. We cannot provide a specific release date at this time.
Thank you for your attention!
Update Log:
Sep 20th, 2024:
Add ER605 V2 2.2.6.
Sep 14th, 2024:
Release of this article.
Feedback:
If this was helpful, welcome to give us Kudos by clicking the thumbs-up button below.
If the solution doesn't work for you, your case is probably different from what is described here.
In that case, please feel free to click Start a New Thread and elaborate on the problem so that we can try to help you further.
Thank you for your great cooperation and patience!
TP-Link Support Team
