New Feature Connect Tapo C425 to H200 Hub: Video Storage & Network Backup Option
This Article Applies To
Tapo C425 (EU/US) V1.0 - Firmware 1.3.9 Build 240701 Rel.67934n
Tapo H200 (EU/US/JP) V1.0 - Firmware 1.3.5 Build 20240726 rel.48294
Introduction
Tapo C425 now supports connection with Tapo H200 hub, offering an additional network connection option and enabling video storage.
- Support Tapo C425 connect H200 hub, saving both WiFi and hub connection as network options, allowing the camera to switch to the optimal network automatically.
- The Tapo C425 can store video on the MicroSD card in the Tapo H200 hub.
How to connect C425 to H200 hub and select network priority?
1. Open Tapo App, go to Tapo C425's device page, go to Device Settings.
2. Click Network Connection -> Network Priority.
3. Enable Network Priority.
4. Click Hub AP to connect Tapo C425 to a H200 hub.
5. Choose network priority: Auto, Router Priority, or Hub AP Priority.
6. Save.
How to change Tapo C425's local video storage to the H200 hub?
*Make sure both C425 and H200 hub are connected to the same local network.
- Method One
- Open Tapo App, go to Tapo C425's device page, go to Device Settings.
- Click Storage& Recording -> Local Storage.
- Click Storage Location, choose Hub Storage. Click "Save To", choose a Tapo H200 hub for camera video storage.
- Save.
- Method Two
1. Open Tapo App, go to H200's device page, click Connected Device.
3. Switch to the Accessible tab, click Manage -> select Tapo C425.
4. Choose Network Priority and Storage Location.
5. Done.
Note
1. Local videos can only be saved to one location: you can choose to save them either to the camera's SD card or to the hub's SD card.
2. To save video to the hub, the camera does not require a connection to the hub. It is recommended to save both connection methods so that the camera can automatically switch networks during poor connectivity to ensure proper video storage.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Wayne-TP That's good to hear, thanks for your help, have messaged you for the beta update. 🙂
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Wayne-TP Thanks for the prompt reply, I was starting to think I was going mad.
- Copy Link
- Report Inappropriate Content
That's not the content included in this update.
For this feature request, you may vote for this post and join the discussion. Trigger C420 camera recording smart action when T100 sensor detects motion
- Copy Link
- Report Inappropriate Content
@Wayne-TP Hi, I have PM'd you regarding beta firmware.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello,
I bought, 3-4 weeks ago, c425 cameras as well as the h200 hub.
I will spare you my disappointment when I realized that I could not record on the hub while the website indicates that I can. nevermind.
I came across the post of this forum as well as Wayne's response indicating that the firmware 1.2.22 (or newer) will be available in one or two weeks ( the reply ).
We are on the third week of waiting; can you please give a new more precise deadline?
I tried to reboot the camera multiple times + push the button to check new update each day.
Thank you
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
You are right, i had to write my infos to be complete.
C425: Hardware v1.2 Firmware v1.2.21
H200: Hardware v1 Firmware v1.3.6 build 20240829 rel.71119 (same as you).
Both are on the same network (wifi mesh with 3 tp-link deco xe75, both are connected to the same deco)
I'm from EU, belgium.
Thank you 🙏
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 7571
Replies: 49
Voters 0
No one has voted for it yet.