Includes deleted devices that cannot be controlled.
Hello
I have problem in some sensors. Here are the steps:
1. Opened the tapo app (android) v3.4.810
2. I went to smart
3. Pressed + icon
4. Chose automation
5. In "When" I pressed add trigger
6. Device status change
7. Chosed one of T110
8. Open
9. Done
10. In then section. Add trigger > send me notification
11. Wrote "aa" > done
12. Create
13. Wrote "bb" > save
Error is showing
"Includes deleted devices that cannot be controlled."
This error is showing in many sensors. Some are working for the same sensors bought together while other is not showing.
I checked my devices. No offline devices exists. Signal is full bar for the hub and the sensor.
I tried the following but the problem still exists:
1. Reinstall the app
2. Restarting the sensors
3. Removing all the automation from smart tab
4. Re adding the sensors
Request your help. I am facing this problem with at least 5 sensors
Regards
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
So far, it looks like this issue has been fully fixed.
Regarding the issue you guys mentioned with some of the outlets in KP303 not being able to be added to automation (not appearing as an option), can you confirm if it's back to normal? If the problem persists, please send me the Mac address of your device separately.
- Copy Link
- Report Inappropriate Content
@Wayne-TP Unfortunately not, it's back to the original issue. All three sockets appear in the Smart>Scenes, but when saving them to a scene, the "Includes deleted devices that cannot be controlled" error message is displayed.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Wayne-TP Everything now works for me. It has done for a few days now. All devices appear in the Home tab and all devices can be controlled by Automations.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 2
Views: 1102
Replies: 25
Voters 1
