4
Votes

Support for ONVIF and/or RTSP protocols on C400 or via Hub 200

  This repeated request has been merged into the main thread Support ONVIF and/or RTSP protocols on C420 S or via the Hub 200. Please vote on the main thread.

 
4
Votes

Support for ONVIF and/or RTSP protocols on C400 or via Hub 200

  This repeated request has been merged into the main thread Support ONVIF and/or RTSP protocols on C420 S or via the Hub 200. Please vote on the main thread.
Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-10 16:08:56 - last edited 2024-06-20 10:15:50
Model: Tapo C400S2  
Hardware Version: V1
Firmware Version: 1.0.12

The Importance of Adding ONVIF and RTSP Protocol Support to Tapo C400 Cameras via Hub 200

In today's world, where security is a priority for many users, integrating surveillance cameras into an overall security system becomes increasingly relevant. One of the crucial aspects of this integration is the support of standard protocols such as ONVIF and RTSP. Adding these protocols to Tapo C400 cameras via Hub 200 can significantly enhance their functionality and ease of use.

Why is ONVIF and RTSP Support Important?

1. Universality and Compatibility

ONVIF (Open Network Video Interface Forum) is a standard that allows different video surveillance devices from various manufacturers to interact with each other. Supporting this protocol on Tapo C400 cameras will enable users to integrate them into any existing security system without needing special software. This is particularly important for those who already have installed systems from other manufacturers and want to add new cameras without significant expenses on upgrading the entire system.

RTSP (Real-Time Streaming Protocol) allows real-time video transmission. This means users can view video from Tapo C400 cameras on any device that supports this protocol, including smartphones, computers, and other IP devices. This provides a more flexible and accessible way to monitor video from anywhere.

2. Professional Capabilities

Adding ONVIF and RTSP support also opens up possibilities for professional use of Tapo C400 cameras. For instance, many video surveillance systems use Video Management Software (VMS) that requires support for these protocols to function correctly. Implementing these standards will allow Tapo C400 cameras to compete with more expensive professional solutions.

3. Reliability and Scalability

Systems built on ONVIF and RTSP standards are more reliable and scalable. This allows users to add new cameras or change the system configuration without significant technical knowledge or the need for specialists. Thus, users can easily expand their security systems as their needs grow.

Importance of Energy Efficiency

One argument against implementing new features on Tapo C400 cameras is the potential reduction in battery life. However, Tapo has already addressed this issue by offering a solar panel for charging the cameras. This means that the cameras can operate for extended periods without frequent recharging, ensuring continuous surveillance even in remote locations without access to the power grid.

Conclusion

Adding ONVIF and RTSP protocol support to Tapo C400 cameras via Hub 200 is an essential step forward that will significantly enhance the functionality and versatility of these devices. It will allow users to integrate cameras into existing security systems, provide professional capabilities, and improve system reliability and scalability. Considering the availability of solar panels for charging, the issue of energy efficiency is also addressed, ensuring uninterrupted operation of the cameras.

   
   
#1
Options
1 Accepted Solution
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200-Solution
2024-06-11 09:54:44 - last edited 2024-06-20 10:15:50

Hi All,
It's recommended to vote on the main thread "Support ONVIF and/or RTSP protocols on C420 S or via the Hub 200"​​​​​​​ for your request, and you can also leave your usage scenarios for evaluation.
Best Regards

Recommended Solution
#9
Options
8 Reply
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-10 16:09:14
100%
#2
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-10 16:29:42
I bought this camera but I cannot do, what I planned. It will be very useful if someday developers will add these protocols in some software update
#4
Options
Re:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-10 21:38:05
Please click on the VOTE button on the top.
#5
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200 (What about for C420?)
2024-06-10 22:19:02 - last edited 2024-06-10 22:19:29

  @Finetiks 

 What about for C420, on a Hub 200?!

#7
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-10 22:20:16
I've been seeing request but I don't think folk have hit the "Vote"
#8
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200-Solution
2024-06-11 09:54:44 - last edited 2024-06-20 10:15:50

Hi All,
It's recommended to vote on the main thread "Support ONVIF and/or RTSP protocols on C420 S or via the Hub 200"​​​​​​​ for your request, and you can also leave your usage scenarios for evaluation.
Best Regards

Recommended Solution
#9
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-11 12:24:01

  @Solla-topee 

but this is a different camera
#10
Options
RE:Support for ONVIF and/or RTSP protocols on C400 or via Hub 200
2024-06-12 05:53:33

  @Finetiks 

Hi,
You can leave a comment with your model number and usage scenario for evaluation.
Best Regards

#11
Options