Tapo C420 Battery Drain Issue
Hello I have tapo C420 (2pack) camera installed.
Since past couple of weeks I am having enormous battery drain Issue in one of my camera, battery is not even lasting a week. When I check the battery status page it is showing me that it is draining almost 15-25% battery every single day. And the detection section is literally empty. Camera is draining battery without any significant detection or being turned on.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
An update for this thread. Upon investigation by an engineer, the camera in question was experiencing excessive wake-ups, resulting in rapid battery depletion. This is likely due to the camera being positioned towards a well-lit street, where sunlight and passing vehicles or pedestrians trigger frequent awakenings.
The detection mechanism of battery-powered cameras differs from traditional wired cameras, and the installation angle can impact the device's battery life and detection abilities. For further details, you can explore this article: How to Install and Configure Battery-Powered Cameras for Optimal Detection Performance
- Copy Link
- Report Inappropriate Content
Please check what's the firmware version of the Tapo H200 hub? Make sure it is updated.
Can you share a picture of the Battery Status page for this C420 camera?
Where is the camera facing, indoors or outdoors?
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
The tech team was made aware of this situation, they will likely reach out to you via email to continue to troubleshoot this case. Please check your email box later and confirm.
- Copy Link
- Report Inappropriate Content
An update for this thread. Upon investigation by an engineer, the camera in question was experiencing excessive wake-ups, resulting in rapid battery depletion. This is likely due to the camera being positioned towards a well-lit street, where sunlight and passing vehicles or pedestrians trigger frequent awakenings.
The detection mechanism of battery-powered cameras differs from traditional wired cameras, and the installation angle can impact the device's battery life and detection abilities. For further details, you can explore this article: How to Install and Configure Battery-Powered Cameras for Optimal Detection Performance
- Copy Link
- Report Inappropriate Content
@Wayne-TP having exactly the same issue. Wednesday this week I went for losing about 1% battery per day to 20%> no changes made, camera not moved. I've moved it inside and covered the camera and it is still activating all the time. Help please
- Copy Link
- Report Inappropriate Content
What's the model and firmware version of your camera? And the firmware of the H200 hub?
Can you provide some screenshots of your camera's battery status page? Please note that the camera is also awake when viewing the live feed. If you watch the live feed for a long time, it will also accelerate the battery consumption.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1018
Replies: 6
Voters 0
No one has voted for it yet.