This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When I turn off the privacy mode, the camera tilts back to it's default position but detects it's own motion. Please add a delay of 2 to 5 seconds between privacy off and motion detection on. Some of the recordings start with this:
Hi,
Thank you very much for your feedback, in this situation, can you help confirm more detailed info about your usage scenario?
1. What detection types have you enabled? How about the Sensitivity settings?
2. Have you inserted an SD card into the camera to store video clips or the video clips are stored on the cloud server?
3. Can you share the video showing the camera detects its own motion?
Best Regards
1. Motions (8), persons (8), manipulation (normal)
2. SD + Cloud (Tapo Care subscription)
3. No. ;)
This happened two times in a row. Haven't had a problem since then. Maybe the camera motor was moving too slow? I'm pretty sure that there is some delay implemented in the camera firmware that waits until the camera is ready before it starts the motion detection, but it's one or two seconds too short.
It happened again though and I'll report back when it happens again.
Hi,
Usually, the camera will record the video clips forward for several seconds after it detects an event, so if your camera detects motion/person soon after turning off the privacy mode, the recorded video clips show the "privacy mode is on" message at the start is normal. It's recommended to pay attention to whether the recorded video clip has motion/person or not, if the camera did detect the motion/person, the recorded video clip is no problem.
Is the Alarm feature enabled on the camera's Device Settings>Alarm page? If so, the camera will alarm when detecting events usually and won't alarm when turning off privacy mode.
Best Regards
Helpful: 0
Views: 400
Replies: 4
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
