Awful sound quality
Awful sound quality
I found an old post from 2022-03-01 17:00:20 with the same subject as a user who has the same problem as me.
When I activate the camera and someone is talking it is unintelligible what they are saying.
The camera is connected to a very fast wifi, so it is not a bandwidth problem, the same problem I have with SD recordings.
I have never been able to test two-way calling, but it should not change much.
The audio is completely unusable, it just doesn't make sense to be there for the quality it has. I have never been able to understand a single word of what the other party is saying.
It works very well for motion detection, I've always been able to see everything, but it seems incredible to me that you can't understand a single word.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
If the audio from the camera sounds muffled or unclear, or the volume is too low, you may try the following troubleshooting suggestions:
1. Make sure that there are no obstructions covering the microphone and speaker openings on the camera.
2. Ensure that the camera is positioned to allow clear and unobstructed sound reception. Avoid placing it in enclosed spaces or near surfaces that may reflect sound.
3. Test the audio with your mobile device positioned away from the camera, preferably in a different room. Proximity between the phone and camera during a voice call can cause audio feedback.
4. Tap the Call icon on the Live View page and then tap the icon at the right upper corner of the Voice Call page, ensure the camera's speaker and microphone are set to the highest value.
If the above tips are not working, can you send me a video that shows your sound problem for further analysis?
Best Regards
- Copy Link
- Report Inappropriate Content
its noise reduction settings. imho - same as c220: https://community.tp-link.com/en/smart-home/forum/topic/648234
- Copy Link
- Report Inappropriate Content
@STN The problem is that there is no setting!
I don't want any noise reduction, I want the original sound as it comes from the camera. I will decide whether I want to filter out noise or not.
For me it is of paramount importance to be able to hear even a background noise to see if there is a problem, it is unbelievable that it is not written anywhere that this filtering is done. It is in my opinion very serious that a surveillance product filters noises and doesn't let you hear them, this could cause very serious problems!
How do I disable noise suppression?
- Copy Link
- Report Inappropriate Content
Hello, noise suppression model of tapo is real pain. I request you to kindly mail support.in@tp-link.com, tapo engineers might develop a beta fw to reduce noise cancellation level.
C220 users also facing similar issues. Heavy noise cancellation muffling the conversation making it impossible to hear out people & vehicles.
- Copy Link
- Report Inappropriate Content
@SillyPari I sent an email. in the meantime it would be helpful to have firmware that eliminates noise reduction, I need to hear what is happening in that room!
- Copy Link
- Report Inappropriate Content
Hi,
If the audio from the camera sounds muffled or unclear, or the volume is too low, you may try the following troubleshooting suggestions:
1. Make sure that there are no obstructions covering the microphone and speaker openings on the camera.
2. Ensure that the camera is positioned to allow clear and unobstructed sound reception. Avoid placing it in enclosed spaces or near surfaces that may reflect sound.
3. Test the audio with your mobile device positioned away from the camera, preferably in a different room. Proximity between the phone and camera during a voice call can cause audio feedback.
4. Tap the Call icon on the Live View page and then tap the icon at the right upper corner of the Voice Call page, ensure the camera's speaker and microphone are set to the highest value.
If the above tips are not working, can you send me a video that shows your sound problem for further analysis?
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee the room is in the living room of a house on top of a piece of furniture. it is not obstructed by anything. the issue is very simple, there is some noise reduction algorithm that prevents you from hearing what is happening. i want to receive all the audio without any noise reduction, also because i want to hear every single noise because i need it to monitor the house from a distance!
it is unacceptable for a surveillance camera to eliminate noise without the user being aware of it and having the ability to disable the function.
so please give me the option to disable any noise reduction function.
at the moment I cannot do the tests you ask for because the camera is 4,000km away, but I assure you that it is placed in a spot where you can hear anything perfectly.
I await your kind feedback.
marco
- Copy Link
- Report Inappropriate Content
Hi,
I have reported the case to the tech team, and they will likely reach out to you via email to continue troubleshooting your issue. Please check your email box and confirm.
Best Regards
- Copy Link
- Report Inappropriate Content
I can't hear a word on my TC40
You need to turn the noise gate off. This is not good surveillance. I don't feel safe using this product if audio ain't doing the job. When it rains I can't hear the rain at all so I am 100% noise gate is always turned on and I want an option to turn it off. Best would be to put a turn on / off buton for noise gate in the app. If, you donXt wanna do that for soem reason then turn it off for my device
- Copy Link
- Report Inappropriate Content
Hi,
We have a beta firmware for the TC40 that may help in your case, please send me(@Solla-topee) the camera's MAC address via a private message if you want to try the firmware.
Before the Upgrade:
(1) Please be sure you have read the Beta Test Agreement before upgrading the Pre-release firmware!
(2) How to update the firmware of the Tapo devices on the Tapo App
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee do you have the same for a TC70?
Does this firmware removes any noise suppression?
I still have the issue since when I created this topic.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 4
Views: 2371
Replies: 13
Voters 0
No one has voted for it yet.