Add a calibration function to the t310 and t315 temperature and humidity sensors.
Add a calibration function to the t310 and t315 temperature and humidity sensors.
It would be useful if there was an ability to 'calibrate' these sensors so they read the same as other sensors and thermostats in the home. My t310 sensors all read slightly differently so being able to tweak up or down 0.1-0.5 of a degree would be useful
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
I have the same issue, T315 reads 71% humidity, calibrated monitor from work reads 57%. So I purchased Govee equivalent as this has an option to calibrate the temperature and humidity readings.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Andy653 I also have a govee temp sensor, they are good, but lack any integration with Google home, which I need.
- Copy Link
- Report Inappropriate Content
Totally agree - urgently needed!
For a "high accuracy sensor" as advertised this is extremely poor.
Mine is actually about 2° off temperature - so what good is a thermometer or temp/humidity sensor if it actually shows you the wrong value?
With 2 degrees off I might as well just take a guess...
Interestingly on the heating thermostat KE100 it's possible to set a temperature offset - only in full degrees but at least this way it's possible to bring it within half a degree of the actual temperature.
So let my add in general and for future devices: ANY temperature/humidity sensor should have a calibration function.
Regarding accuracy of this calibration/offset please see this feature request:
https://community.tp-link.com/en/smart-home/forum/topic/646348
- Copy Link
- Report Inappropriate Content
! yep. much needed. Bought 6x Tapo T310 sensors. The sensors are not calibrated well enough. +/- 5% RH +/-0.8C in the bunch. But they are clustered around the correct values from my well behaved lab sensors.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
I bought multiple devices and put them next to each other. 10% difference in humidity read out. and 0.9° in temperature.
either calibrate them in the factory or provided a tool
- Copy Link
- Report Inappropriate Content
We NEED calibration setting on these things. Please Tapo team!
- Copy Link
- Report Inappropriate Content
Information
Helpful: 9
Views: 1541
Replies: 13
Voters 9
