@JohnS. 

JohnS. wrote

We NEED calibration setting on these things. Please Tapo team!

I agree, placed two sensors, one new, inside a sealed container with a known humidity source, one sensor reads correctly, the older sensor by 6 months, is reading between 4% and 5% higher relative humidity.

There needs to be the ability to add an offset to account for the error.

  @I have a t315 sensor and I notice that the humidity measurement shows a difference of plus 7%. This means that my different humidity meters show 63% humidity and the t315 shows 70% humidity. All three sensors that I used for comparison are from different series and are not Smart. Two of the sensors cost €20 each and one was a little cheaper at €10. So from that point of view it would be good to implement a calibration function for the t310 and t315 series.