Record longer before motion detection events
When using motion detection recording (not continuous recording), the Tapo app records 1~2 seconds before a motion detection event happens. I would the amount of time before the event to be longer, ideally a custom setting for each camera. At the moment I have enabled continuous recording so I can manually rewind a little, this way I get to see what happend before the motion detection event.
In the following recording timeline diagram, the top bar represents how it works at the moment: motion is detected at [1], and recording starts only 1~2 seconds before [1]. The bottom bar shows how I would like this to work: motion is detected at [1], but recording starts at [2], in other words, before the event happens. The time before the event t is specified in the camera settings by the user. To do this, the camera would need to loop-record a few minutes in case motion is detected so that it can recover the footage before the event when required:
Hopefully that makes sense, let me know if something isn't clear. Happy new year!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Solla-topee YES !!! please allow for the camera to start recording a few seconds befor it detects motion ...
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@RandyAndy This is probably my biggest complaint by far. As I said in an earlier post, I am forced to enable continuousrecording to ensure everything is recorded. There are other issues though, for example there is no way to skip backwards or forwards besides swiping the timeline which is very low resolution, essentially it's a complete waste of time since you first have to zoom in all the way (being careful not to slide left or right in the process!) and still end up going back or forward too far. A simple button skip +10/-10 seconds would fix this, I need to create a feature request for that. The other mayor annoyance is the fact that the notification sound is the same for all cameras. It would be so much better if each camera would have a different notification sound, this way I would know without having to open the app whether "the cat has entered the housee", or "there is someone at the front door". Development is very slow.
- Copy Link
- Report Inappropriate Content
Hi,
Typically, if the camera's detection and recording features are configured correctly, it will record when detecting events. If the camera's detection or recording feature is not working well and you are willing to troubleshoot, it's recommended to start a new thread here with the following information for further assistance.
1. The camera's model number and hardware version.
2. The detailed problem phenomenon.
3. Is an SD card inserted into the camera, or does the camera subscribe to the Tapo Care server?
Best Regards
- Copy Link
- Report Inappropriate Content
This cctv is so annoying I am getting 1second vidios which are missing everything I need to be seeing, thinking of changing this terrible and constantly unstable network cctv cam C510 outdoor to a better cam.
- Copy Link
- Report Inappropriate Content
Hi,
You can try to reboot or reset the camera and then check if it will work fine.
Best Regards
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
@Pali-Madra The amount of time ideally would be user-defined per-camera setting. 5 seconds may work for you, but some users might require longer. My "Cat camera" doesn't need very long, I just want to know if my cat has entered the home, 5 seconds here would be fine. My front porch camera, on the other hand, benefits from recording longer, maybe 30 seconds or even 60 seconds. It doesn't matter, there shouldn't be a limit here. If the user chooses to record 5 minutes before the event, that should be possible. If two events overalp, they would just be a single event. I can't think of any technical challenges that would prevent this from being implemented.
- Copy Link
- Report Inappropriate Content
I second that request. Those are usually the basic features that the camera should have. I have cheaper camera that has that fonction and even better what other cheaper camera has that tapo doesn't have is choosing the exact time of the recorded video for preview. I will also add another very annoying issue and I am will open a new request about it which is the person detection it doesn't make difference between a cat a butterfly and a human being it's very very annoying no matter how the sensitivity is.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 22
Views: 2514
Replies: 29