C210 Red light steady
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello
Red lights are steady, any other way to reset? 5 sec reset doesnt work.loc: Manila, Philippines
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
Please refer to the following steps for a try.
1. Make sure the internet is stable, and the router has a strong signal.
2. Power off the camera.
3. Move the camera closer to the router and power on the camera.
4. Wait for around 10 minutes, and check if the camera's LED will change.
5. Press and hold on the reset button for 10 seconds to reset it, and please let me know if the LED has any changes.
If the LED has no change at all, you can contact your retailer or local support to check if your device is under warranty.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
Please refer to the following steps for a try.
1. Make sure the internet is stable, and the router has a strong signal.
2. Power off the camera.
3. Move the camera closer to the router and power on the camera.
4. Wait for around 10 minutes, and check if the camera's LED will change.
5. Press and hold on the reset button for 10 seconds to reset it, and please let me know if the LED has any changes.
If the LED has no change at all, you can contact your retailer or local support to check if your device is under warranty.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 479
Replies: 1
Voters 0
No one has voted for it yet.