Tapo c200 rtsp and onvif not working anymore
Hi everyone
Since 2 days the tapo c200 does not have working rtsp or onvif video streams anymore. It was running since months in blueiris without any issue and then suddenly at 5.00AM in the morning the stream stopped. BlueIris, Ispy nor VLC can get a running stream. I checked I used this information form here https://www.tp-link.com/de/support/faq/2680/ but it is identical to what was working 3 months ago in VLC or non-stop since then in blueiris. I also set a new camera account again but it did not help.
It has the newest firmware on it and auto firmware update enabled so I don't know if the newest firmware has an issue or not.
The error message VLC and all others are spitting out is "cannot connect to ipaddress...". The cam however is working in the tapo app! IP address etc. are correct and as said camera account has been reset but still no connection possible.
Does someone have an idea what the issue could be? It worked flawlessly until 2 days ago.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Well it is
Modem-Firewall-LocalNetwork-WIFI-AP
What does this information help you? I will not paste here private things like how my Network situation is.
The Server hosting BlueIris is in the local WIRED Network. The C200 on a WIFI AP connected. It gets an IPaddress form the DHCP Server as I see the request in the dhcp log of the server. I see the IP in the APP and the cam is working IN THE APP. Can we now please rule out this non-sense about network issues on our side if even others have the same issue.
One more time: The cam was working fine for weeks until one morning where the camera restarted after the firmware update and since then does not allow any connection anymore. All other WIFI connected devices are working fine like tablets, mobile phones, other WIFI cams from ESCAM and other brands, all wired connected devices are working too. It is just this single cam from you which does not allow connections anymore.
Can we rollback to a previous release please to test it?
- Copy Link
- Report Inappropriate Content
It's certainly not a network issue because that hasn't changed. This is clearly an update that has been released that hasn't been tested properly.
- Copy Link
- Report Inappropriate Content
The network is simple. They are all on the same network and they can all see each other.
There is simply put no diagram to draw. They are on the same AP and same subnet.
Note, NOTHING changed on the network side and a firmware update broken this.
-M
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Well, I solved it by buying another cam and throwing the c200 into the bin.... Others, please feel free to use this thread for your issue if it is the same. I do not have the time to deal with this any longer.
Kind regards
- Copy Link
- Report Inappropriate Content
@firefox7518 @Strickers @mattsm
Hi,
It's unable to roll back the firmware to the previous one.
I have escalated the cases to the tech team, and they will contact you via email to continue the troubleshooting. Please check your email box and confirm.
Best Regards
- Copy Link
- Report Inappropriate Content
Well then it was a good wise idea to throw that thing away. If a device cannot even do a rollback of a firmware, it is better to not use anymore. It's the main argument then to never do any firmware update with it or else you are screwed. Very very bad decision from TPLink to not allow that.
Whatever, I do not need support anymore, you can cancel the ticket. I will not use tplink cams in the future. Thanks
- Copy Link
- Report Inappropriate Content
Hi,
Usually, we will locate and solve the problem as soon as possible based on the latest firmware if you encounter a problem after upgrading, and your cooperation is highly appreciated throughout this process.
However, if you do not wish to continue troubleshooting, you may disregard the email and the case will be automatically closed later.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee someone from tplink emailed me once and I provided the same info as has been provided here. Not further response since the initial email.
- Copy Link
- Report Inappropriate Content
Hi,
I have reminded the tech team to follow up on your issue soon, and they may need some time to analyze the problem. Please wait patiently.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 5
Views: 12401
Replies: 65
Voters 0
No one has voted for it yet.