Tapo D230 battery
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I installed a brand new Tapo D230 at 14:47 yesterday with a 100% charged batter, only to find it drained fully in less than 24 hours.
I have only person detection enabled with sensitivity level of 2. Wake up is set to event, retrigger time is set to 30 secs, record buffer to 3 secs and clip length to 30 secs. Night mode is set to infrared and video quality is at 960P.
The doorbell does face a street and there is a street light casting a shadow with moving trees, but I've set the privacy zone to block that area from recording.
I charged the battery again today and installed approx 19:20 and it is already down to 88%.
I don't expect to get the 180 days TP-Link advertiser but don't expect to have to charge the battery everyday, kind of defeats the object of not getting a wired doorbell.
Has anyone else experienced similar or would you say I've got a bad battery?
Thanks
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
For the sake of power saving, the Camera is usually in a sleep state (low power consumption). The camera can be woken up when doing some operations on the APP like watching the camera’s live view. And it can also be woken up by the PIR sensor.
How does the battery camera/doorbell be woken up?
When the doorbell faces a street, the events happening in front of the camera can cause the camera to be woken up frequently so the doorbell's battery is consumed quickly.
You can refer to the link to adjust the settings on the Tapo app to extend the battery life(such as reduce the wake-up sensitivity) and check if it's possible to use the wedge in the box that comes with the camera to adjust the camera's views to make it do not face the street so the battery will last for a longer time.
How do I extend the battery life of my Tapo Camera/Doorbell?
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee thank you for the information and links. I understand all this and have already adjusted nearly all setting to the minimum sensitivity and recording length etc. this just feels like compromising the functionality of a device which ultimately is supposed to be designed to aid security and convenience at the front of a property Plus the convenience of a wireless option is removed when having to change or charge the battery everyday even with all low settings.
- Copy Link
- Report Inappropriate Content
Hi,
In this case, please help confirm the following information, and I'll escalate your case to the tech team for further analysis.
1) A picture of the camera's Device Settings>Detection page, and the pictures of the Wake-up Settings and Person detection pages.
2) A picture of the Battery Status page.
3) A picture of the Device Settings>Storage & Recording>Clip Settings.
4) A short video recorded on the camera's Live View page.
You can send the video and pictures to your cloud server(such as Google Drive) and generate a link, then send me the link via private message to download them.
Best Regards
- Copy Link
- Report Inappropriate Content
@Solla-topee I’ve been monitoring the device for several days now as it suddenly seemed to hold battery. It has only dropped 2% in the last 3 days which is a bit more like what I was expecting.
I will continue to monitor and open a new support ticket if required.
Thanks
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for your attempt and cooperation, and please feel free to contact us if you need further help.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi I got the same problem here. SInce yesterday after the firmware update the app indicates that the doorbell has an empty battery. Via the hub I can still see the images that the camera has recorded and the doorbell itself also responds when I walk by. I think this really has to do with the new firmware. Before I installed this firmware the battery percentage stayed at 98% for weeks. So @TP-link can you solve this problem. Thanks Andre
Chris-F wrote
I installed a brand new Tapo D230 at 14:47 yesterday with a 100% charged batter, only to find it drained fully in less than 24 hours.
I have only person detection enabled with sensitivity level of 2. Wake up is set to event, retrigger time is set to 30 secs, record buffer to 3 secs and clip length to 30 secs. Night mode is set to infrared and video quality is at 960P.
The doorbell does face a street and there is a street light casting a shadow with moving trees, but I've set the privacy zone to block that area from recording.
I charged the battery again today and installed approx 19:20 and it is already down to 88%.
I don't expect to get the 180 days TP-Link advertiser but don't expect to have to charge the battery everyday, kind of defeats the object of not getting a wired doorbell.
Has anyone else experienced similar or would you say I've got a bad battery?
Thanks
- Copy Link
- Report Inappropriate Content
Hi,
Please try to remove the battery from the camera, wait for 10 seconds, insert the battery again, and ensure the camera and the battery connect tightly.
If the problem remains, please help confirm:
1) The detection type you have enabled and the sensitivity settings.
2) The LED status on the camera when someone walks in front of the camera and the battery shows 0 on the Tapo app.
3) If you have another battery for the doorbell, insert it into the doorbell and check if it has the same issue.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1930
Replies: 7
Voters 0
No one has voted for it yet.