At all, nettb from FRANCE.

Hello everyone,

 

Before to explain my problem, this is my hardwares:

FREEBOX revolution router mode (192.168.0.1)

TPLINK ROUTER ER7206 - V1, firmware 1.2.3 Build 20221104 Rel.41500 (192.168.2.1)

TPLINK SWITCH TL-SG3428 - V2, firmware 2.0.10 Build 20221130 Rel.57838 (192.168.2.10)

TPLINK ROUTER 4G/WIFI - TL-MR6400 v5 00000001,Firmware Version:1.1.0 0.9.1 v0001.0 Build 210803 Rel.55933n (192.167.1.1) avec 4G Bouygues 40go

TPLINK EAP235 WALL, V1 - Firmware 3.1.0 (192.168.2.20)

 

WAN1:

Static IP 

ip: 192.168.0.25

msk: 255.255.255.0

gtw: 192.168.0.10

dns1: 192.168.0.10

dns2: 1.1.1.1

 

WAN/LAN1

Static IP 

ip: 192.167.1.101

msk: 255.255.255.0

gtw: 192.167.1.1

dns1: 192.167.1.1

dns2: 1.1.1.1

 

Load Balancing:

Load Balancing Weight: 1 / 1

Application Optimized Routing: ON

Link Backup: ON

Primary WAN: WAN

Backup WAN: WAN/LAN1

Backup Mode: Always Link Primary

Mode: Enable backup link when any primary WAN fails

 

Problem:

 

I have a problem with the Load Balancing on my ER7206. My primary ISP is FREE.FR with Freebox Rev (Router mode); my backup ISP is my MR6400 with a LTE 4G connection. My primary link is breakdown for 3 days. My Freebox is alive but no Internet connection. The ER7206 don’t swap on the backup link automatically. I must unplugged the primary cable to force the backup link on 4G. Then, i have Internet connection. No problem with that. But when i plugged again the primary cable, the backup link is balancing on primary connection. But the primary ISP don’t working… I don’t understand, the ER7206 don’t check an URL or a DNS to validate the connexion. It looks like the primary connection is always alive when the cable is plugged.

 

What is my problem in my configuration; i have missed something ?

Thanks for your help.

Best regards