Smart Home Community > Tapo Smart Light Bulb > Frustrating tapo smart bulb set-up
< Tapo Smart Light Bulb

Frustrating tapo smart bulb set-up

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Frustrating tapo smart bulb set-up

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Frustrating tapo smart bulb set-up
Frustrating tapo smart bulb set-up
2022-05-03 19:55:19
Model: Tapo L510E  
Hardware Version:
Firmware Version:

Hi to everyone!

How are you?

 

I am very frustrated with the tp-link app.

I have a tapo bulb 510E and when I try to set it up, the app won't connect to my wi-fi. 

I watched the tutorial video and the guy get a notification on his phone when the app needs to connect to the WiFi like "will you allow tapo to connect?" My phone doesn't ask me that. So it keep telling me I have to reset and restart the process but I did it 12 times, checked every information,...

- My phone finds the bulb and connects to it

- the app finds my wi-fi

But after that it keep loading without any results until it tells me to reset and restart.

Please help me, I am turning crazy.

 

Thanks a lot !

 

  4      
 
  4      
 
#1
Options
3 Reply
Re:Frustrating tapo smart bulb set-up
2022-05-05 03:35:47

Hello   @Madness_by_vee 

Wish I could help! If tapo bulb failed to connect to WiFi or stuck after you put in wifi password , please try some tips in Case3.

What should I do if I fail to configure the Tapo Smart Plug?  (also appliable for tapo bulb)

Make sure VPN is turned off, try a different mobile device if you got one.

Confirm correct Wi-Fi password was given during set up , you could forget router wifi network on the mobile phone and manually connect to router wifi to check if the password is correct.  If router has a combine SSID for 2.4Ghz & 5Ghz, you could set up different names for them and connect bulb to the 2.4Ghz wifi, WPA/WPA2-PSK. 

 

If still the same, can I know the model of router, and have aphoto of wifi settings on router， a photo of page where the setup got stuck, model of phone and its Andriod/IOS version.

Please also confirm APPis up to date. 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#2
Options
Re:Frustrating tapo smart bulb set-up
2022-05-05 15:50:45

  @Solla-topee 

 

Hi,

 

I tried everything you said, it doesn't work.

My phone is a Xiaomi redmi note 10, you can see the android version in the pictures.

The app is up to date since I installed it a few days ago... Shouldn't be so complicated to install a bulb --'

 

Thanks a lot,

Have a nice day ^^

  2  
  2  
#3
Options
Re:Frustrating tapo smart bulb set-up
2022-05-06 02:05:36

  @Madness_by_vee Thank you for the further information

  • Please try a different phone if you got one
  • Try a simple Wi-Fi SSID / Wi-Fi name on the router like a one -word SSID & Try Wi-Fi password less than 16 digits.

If still the same, can you take a photo of the label of hua wei router or model of the router? Many thanks! Have a nice day too. 

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
  0  
  0  
#4
Options

Information

Helpful: 4

Views: 3487

Replies: 3

Related Articles
 Smart action with tapo bulb and tapo camera
750 0
Tapo smart bulb L 630
433 0
 Tapo bulb failed on!
495 0
 Tapo smart bulb
525 0
 Unable to create Presets for Tapo L510 smart bulb
0 0
Tapo Smart Bulb Frequent Settings Reset
709 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.