Implemented 【Tapo Plug】 Set Default State after Power Failure is Now Available on the Tapo Plugs
Updated on Aug 4, 2023
Our Tapo Plugs support the feature to set the default state after power stores/a power failure. Below is the instruction to configure this feature.
Note: Please ensure your Tapo Plug and Tapo app is up to date to use this feature.
Tap the Tapo plug model card on the Tapo app>tap the Settings icon 
at the top right corner to enter the Device Settings page>click on Default State to set the Last "On" State/On/Off status as per your desire.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
how about the P100 US version? please update this as well. PLEASE
- Copy Link
- Report Inappropriate Content
@Solla-topee - Hi, any idea when will be this function available for V1?
- Copy Link
- Report Inappropriate Content
Hi
Need this feature please.
I have 4x P100 (E) v1.20.0 but stuck with firmware 1.4.5 build 20210122 ref 57265.
I cannot upgrade to have this feature.
- Copy Link
- Report Inappropriate Content
Good day@funcat , from the information I confirmed last time, Tapo P100 V1.2 (UK) & (EU) add this feature on 1.4.9 , currently not for other country versions.
You may leave the country version of plug here and we would record your feedback first. If your device is of UK/EU version but did not get the firmware update, please share the device Mac address to us via private message, thank you.
- Copy Link
- Report Inappropriate Content
Good day@LubosB , the estimated date of adding this feature on Tapo P100 V1 is in Q4, but this could be delayed, it is recommended to wait for the firmware update in Tapo app.
- Copy Link
- Report Inappropriate Content
@Solla-topee Will we be getting this feature for the P100 v1.0.0 currently running firmware 1.3.0 Australian version?
- Copy Link
- Report Inappropriate Content
@Pizzo More details about P100 V1 are unclear, but it normally starts with (EU) version first, I will also record your request .
- Copy Link
- Report Inappropriate Content
@Solla-topee the model is AU/1.0
- Copy Link
- Report Inappropriate Content
Can we have this feature also available on Hardware Version 1.0 (Asia) of the Tapo 100? I have several and bought them just a couple of months ago. I do not have the budget to replace them all to Hardware Version 1.2 just for this. I have them all updated to Firmware Version 1.3.4... But I still couldn't find the 'Default State' option in the Tapo App.
- Copy Link
- Report Inappropriate Content
I have 3x Tapo P100's, V.1.20.0, FR -- with the firmware capped at 1.4.5.
Is it expected behaviour that I still cannot use the new default state parameter?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 7
Views: 11399
Replies: 33
Voters 7
