Need 3 way without wire

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Need 3 way without wire

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Need 3 way without wire
Need 3 way without wire
2021-04-06 00:25:34
Model: HS200  
Hardware Version: V8
Firmware Version: 1

Hi,

 

I would like to control a light from 2 diffrents location. Location #1 , power and light wire. Location #2, only power availlable, no 3 wire ...  can i connect a switch at location#2 without any device connect to his load and act as a 3 way switch with location#1 ?  Thanks for any comments !

  0      
  0      
#1
Options
2 Reply
Re:Need 3 way without wire
2021-04-09 11:22:50

@AlexTrep  

 

An ordinary 3 way switch still requires 3 lines on each side at least, so I think you need a professional electrician to double-check the wiring in your house if you want to use a 3-way.

 

Tp-link smart 3 way switch model is HS210KIT. Correctly wiring HS210 normally requires 4 lines in each electrical box: 
1*Common Wire (Live or Load) 
1* Neutral wire,
2*Traveller Wires 
1*Ground Wire (optional)
(NOTE: If  No Neutral Wire is present, HS210  can Not be installed  )

 

 

  0  
  0  
#2
Options
Re:Need 3 way without wire
2021-11-10 17:18:12

@AlexTrep  Did you figure anything out about this. Wanting to use Kasa for a project to hit price points. However, I have the same issue. Need to do a simulated three way with no load at the second location. This is extremely simple with Lutron Caseta, but im trying to keep the budget down for this customer.

  0  
  0  
#3
Options