Separate switches

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Separate switches

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Separate switches
Separate switches
2020-10-10 02:31:32
Model: HS210  
Hardware Version:
Firmware Version:

Can I buy the hs210kit and separate the two switches to activate two separate lights?

  0      
  0      
#1
Options
1 Reply
Re:Separate switches
2020-10-16 06:19:43

@QcDbz 

Good day,

Thank you very much for your time and patience.

Sorry for the delay.

Did both light used to be controlled by 3-way switches?

If yes, you could replace the one dumb switch used to connect the neutral wire by HS210

https://www.tp-link.com/support/faq/2009/

Q: What if only one of my switches has a neutral wire?

A:  After examination, if you find that one wall switch has a neutral wire bundle but the other one does not, you may still be able to use HS210. While HS210 is designed to work in a pair, you can replace the wall switch with the neutral wires while leaving the old wall switch in place. If the neutral-less wall switch is very old, pops when actuated or has any other signs of age, you should replace this switch with a new, standard three-way switch to ensure reliable performance. It should be noted that this is a non-standard configuration for HS210 and results may vary.

 

Thanks a lot.

  0  
  0  
#2
Options