Date and Time does not update.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
I have installed and set up my Tapo C200 sucessfully. I am now able to see image and record video.
But the date and time still wrong past 5 days of installation.
My router is updated with right date and time. Also I am able to ping few NTP servers. But camera date time is not updated.
I already also set my timezone properly to UTC -3.
I figured out that every time I reset the camera date and time is set up like 2020-05-20 01:00:00.
I would like to find out a work around because it is making my cam records wrongly.
attached a screenshot with wrong date time.
regards
Kleber
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
@Brook Same problem with a Tapo C100, after restart I get 2020-05-19.... no time&date update. My DNS resolution seems to work accordingly: n-use1-device-api.tplinkcloud.com (3.224.48.251) and n-deventry-dcipc.tplinkcloud.com (52.210.177.125).
- Copy Link
- Report Inappropriate Content
Good day,
Thanks a lot for your time and patience.
Sorry for the delay.
How long have you had the camera and when did this issue start?
After the camera went back to the default time, if you re-select the time zone, would the time be corrected?
Have you updated the firmware of the camera and the version of the Tapo APP to be the latest?
What is the model number of the home router and have you turn off the firewall and modify the NTP server on the router to have a look?
Thank you very much.
- Copy Link
- Report Inappropriate Content
Sorry, my bad... :(
A second review of my firewall setup revealed I missed a rule blocking NTP traffic for a certain IP range. Adding this device to the NTP IP whitelist solved the problem.
- Copy Link
- Report Inappropriate Content
I have the same problem with my tapo c310 and c200 camearas
the time and date doesn't work
please help me
- Copy Link
- Report Inappropriate Content
Hi, Can I have some pictures of the time settings on the Tapo C310 and C200?
And how long of the time gap, one or two hours?
Thank!
- Copy Link
- Report Inappropriate Content
THE SAME PROBLEM WITH 2 C100 & 1 C200 CAMERAS, THEY ALL HAVE A 2020 DATE AND IT WON'T RESET. TRIED EVERYTHING I CAN THINK OF BUT STILL THE 2020 DATE APPEARS ON THE SCREEN. SHOULD BE ABLE TO SET THE DATE FROM THE ON SCREEN SETTINGS, IT WOULD MAKE LIFE A LOT EASIER FOR EVERYONE,
- Copy Link
- Report Inappropriate Content
@Kleber_Bueno Are you using your cam on a guest network where internet applications are restricted to surfing and mailing only. If so, ntp requests are not working and the cam can't update there internal clock too.
- Copy Link
- Report Inappropriate Content
I'll check that but I'm sure that isn't the problem. Phone is used as router so the option of using WiFi is limited..
- Copy Link
- Report Inappropriate Content
I'm sure it's because the cam is operated locally...
- Copy Link
- Report Inappropriate Content
@MALVICO l guess TP-Link has it's own NTP Server und the address of this one is hard-coded in the firmware.
Have tried a few other affordable cctv Cams like Sricam and Xiaomi before. Compared to that ones the C200 is still the best.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 20
Views: 19267
Replies: 26
Voters 1
