Changing wifi name on Tapo C200 after initial setup
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I successfully set up my camera with my wifi network.
I now want to move it to a different network, but clicking on the wifi name within the camera settings does not let me change it.
Is the only option to reset? If so, how do I best preserve my settings.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello everyone,
After changing the home Wi-Fi name and password, you might need to reset the camera and set it up with the new Wi-Fi
You will need to perform a soft reset or factory reset so the camera will goes to config mode
Please refer to the following steps:
- Reset the Tapo camera as guide here How to reset my Tapo camera
- Set up the camera again on the Tapo APP:How to set up the Tapo camera
Note : Some tapo camera now supports a soft reset, you could refer to the camera user guide for details, e.g, Tapo C310 User Guide
A soft reset that does not erase the other settings, while you will need to go through the setup process again and connect the new Wi-Fi network
Thank you very much.
More Articles:
- Copy Link
- Report Inappropriate Content
Hello, reset is the only option; and after we hard reset it, we need to configure it again, there is no option to backup the previous settings.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Got it, while it is fortunate that the configuration is easy and you won't have to spend more time to restore the settings.
- Copy Link
- Report Inappropriate Content
Hello.
My camera for some reason after RESET connects back to wifi by itself even without phone or Tapo launched.
Does not appears in Tapo app :( Looks like RESET does not clear wifi settings.
Anything else I can do?
- Copy Link
- Report Inappropriate Content
Hello, I have changed my Wi-Fi User Name and Password and now both my Tapo C200 showing off line. Please advise in step form what I need to do to re-activate both these cameras - thank you.
Regards,
Once
- Copy Link
- Report Inappropriate Content
Good day,
After changing the home Wi-Fi name and password, you might need to reset the camera and set it up with the new Wi-Fi:
Please refer to the following steps:
- Reset the Tapo C200 to the factory default: such as https://www.tp-link.com/support/faq/2705/
- Set up the camera again on the Tapo APP: https://www.tp-link.com/support/faq/2710/
Thank you very much.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hello everyone,
After changing the home Wi-Fi name and password, you might need to reset the camera and set it up with the new Wi-Fi
You will need to perform a soft reset or factory reset so the camera will goes to config mode
Please refer to the following steps:
- Reset the Tapo camera as guide here How to reset my Tapo camera
- Set up the camera again on the Tapo APP:How to set up the Tapo camera
Note : Some tapo camera now supports a soft reset, you could refer to the camera user guide for details, e.g, Tapo C310 User Guide
A soft reset that does not erase the other settings, while you will need to go through the setup process again and connect the new Wi-Fi network
Thank you very much.
More Articles:
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 51
Views: 149274
Replies: 10
Voters 1