Smart Home Community > Kasa Smart Plugs > Google Home doesn't get a proper response from Kasa anymore
< Kasa Smart Plugs

Google Home doesn't get a proper response from Kasa anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Google Home doesn't get a proper response from Kasa anymore

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Google Home doesn't get a proper response from Kasa anymore
Google Home doesn't get a proper response from Kasa anymore
2019-08-28 19:41:52 - last edited 2019-09-01 05:41:56
Model: HS110  
Hardware Version: V2
Firmware Version: 1.5.2

Hi

 

I am using a few of the HS110(EU) Smartplugs and control them via my Google Home Devices.

They are working fine but I noticed that since about 2-3 weeks Google Home doesn't get a proper response from the TP-Link devices.

 

It works when I give the command "Hey Google - turn on LampXY" - but Google Home gives the answer: "Sorry, I didn't get any response".

Normally it should say: "Okay, I turned on LampXY". Where there any changes which could affect this? I didn't change anything in my home network.

It's not a big thing but pretty annoying when you get always the same response "Sorry, I didn't get any response".

 

Any help or information is appreciated!

Thanks!

Chris

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Re:Google Home doesn't get a proper response from Kasa anymore-Solution
2019-08-30 10:43:23 - last edited 2019-09-01 05:41:56

Hi Kevin

 

thank you for your reply - I think the problem has been solved.

The evening I came home it was working like normal again - without changing anything.

 

I tried to remove the link between Kasa App in my Google Home App and added it again a few days ago - which didn't help. Everything was working fine, except the response - also operating the plugs directly via Kasa App worked fine. I wanted to contact Google Support aswell but when I came home it was working again - so I want to believe someone saw my post here and changed something. cheeky Sure, my Smart Plugs have names and now I am receiving the usual answers from Google Home like "Ok, I'm turning on the Lamp".

 

All the best,

Chris

Recommended Solution
  0  
  0  
#3
Options
5 Reply
Re:Google Home doesn't get a proper response from Kasa anymore
2019-08-30 09:17:44

@SirWeasel 

 

Are you able to control the HS110 remotely via the kasa app even though the google home does not response?

 

Try to delete it on the Google home and link it up back to the Kasa to give it a go.

 

Besides, you can change the device name of the smart plug.

 

And you can give a call to Google and get some help at their end.

 

Good day.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  1  
  1  
#2
Options
Re:Re:Google Home doesn't get a proper response from Kasa anymore-Solution
2019-08-30 10:43:23 - last edited 2019-09-01 05:41:56

Hi Kevin

 

thank you for your reply - I think the problem has been solved.

The evening I came home it was working like normal again - without changing anything.

 

I tried to remove the link between Kasa App in my Google Home App and added it again a few days ago - which didn't help. Everything was working fine, except the response - also operating the plugs directly via Kasa App worked fine. I wanted to contact Google Support aswell but when I came home it was working again - so I want to believe someone saw my post here and changed something. cheeky Sure, my Smart Plugs have names and now I am receiving the usual answers from Google Home like "Ok, I'm turning on the Lamp".

 

All the best,

Chris

Recommended Solution
  0  
  0  
#3
Options
Re:Re:Re:Google Home doesn't get a proper response from Kasa anymore
2019-09-01 05:41:35

@SirWeasel 

 

Hi, Chris, thanks for your valued reply, glad to hear that it works well now.

 

You can take more time to verify its performance, any further problem, please let us know.

 

Have a nice day.

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#4
Options
Re:Re:Re:Google Home doesn't get a proper response from Kasa anymore
2019-09-29 22:00:28

@Kevin_Z I’ve got the exact same issue with both my dimmers. HS 220

 

whenever i ask google assistant to activate them it works but the assistant answers Sorry I didn’t get any response”. This is quite annoying... 

  0  
  0  
#5
Options
Re:Re:Re:Google Home doesn't get a proper response from Kasa anymore
2019-09-30 01:29:38

@Gorti 

 

What about the kasa app? Can you control the HS200 with it remotely? 

 

If it works, try to change the device name of the HS200 and delete the link between kasa app and Google home, then re-link them. 

 

Please ensure that the firmware of the HS200 is up to date. 

 

May it help and have a good day. 

 

 

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Connect TP-Link Archer BE550 to Germany's DS-Lite (Dual Stack Lite) Internet via WAN Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router Archer BE800 New Firmware Added Support for EasyMesh in AP Mode, DoH&DoT, and 3-Band MLO Connection Archer AX90 New Firmware Added Support for EasyMesh and Ethernet Backhaul If you found a post or response helpful, please click Helpful (arrow pointing upward icon). If you are the author of a topic, remember to mark a helpful reply as the "Recommended Solution" (star icon) so that others can benefit from it.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1339

Replies: 5

Related Articles
Kasa not linking to Google home
2265 1
Tapo T100 - Google Home
554 0
KL60 is not recognized from Google home app
861 0
T110 door sensor and Google Home
1011 0
Google Home see P100 offline
581 0
"No compatible devices found" in Google Home...
345 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.