NC450 goes offline on WLAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Camera Name: NC450 2.0
Model: NC450 2.0
Firmware: 1.5.0 Build 181022 Rel. 3A033D
Hello to all!
Like many others in this Forum, we have strange connectivity issues with the NC450 V2.
My setup:
We need the camera connected to WLAN (Wifi), to connect via Ethernet cable is not an option.
After initial setup the camera via tpCamera App (Iphone), with cable pluged in, i changed from DHCP to Static IP. Pulled the cable and WLAN is connected at Rate 89%.
No Cloud Settings taken, we don't need it, the cam should only work in the local LAN/WLAN.
Login via Browser Firefox (64.0.2) and Live View is ok.
Installed TP-Link CameraControl in Windows 10. Login - all works fine.
After about 30 - 40 mins the TP-Link Camera Control shows "Connection Error".
tpCamera Version 3.1.4 App (Iphone) shows the NC450 "Offline".
The LED on the NC450 is constant green.
After powercycle, I upgraded the Firmware from 1.3.4 to 1.5.0.
Then i reset to "factory default settings" and setup the camera new.
All worked!
After about 30 - 40 mins. - Connection Error on TP-Link Camera Control. tpCamera on IPhone shows "offline" again.
Not able to Login via Firefox etc. The Camera Website is not reachable. Not able to ping the IP Adress.
The LED on the NC405 is constant green.
After power off the camera and turn on again, it works again... for a while.
Is there any solution for this ?
Otherwise we would send this thing back and try another manufacturer.
Regards,
Chris
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi Kevin_Z,
Could you email me the downgrade procedure?
I tried to do that by ipcam web management without success.
I'm on 1.5.0 version and I would try to come back to 1.3.4 to see if my disconnection issues solve.
Thanks
- Copy Link
- Report Inappropriate Content
Have done that, check your inbox please.
Adba wrote
Hi Kevin_Z,
Could you email me the downgrade procedure?
I tried to do that by ipcam web management without success.
I'm on 1.5.0 version and I would try to come back to 1.3.4 to see if my disconnection issues solve.
Thanks
- Copy Link
- Report Inappropriate Content
Thank you so much!
It seems working right now.
- Copy Link
- Report Inappropriate Content
Great to know that. 
- Copy Link
- Report Inappropriate Content
Good afternoon everyone,
I have also recently upgraded firmware to 1.5 and now loosing connection through my NVR randomly, the camera will not let me restore the older firmware. is there a solution? Any help would be great.
Rich
- Copy Link
- Report Inappropriate Content
Hello Kevin_Z,
Can you email me the downgrade procedures too?
I'm the 1.5.0 Version and having the same offline issue.
Many thanks,
Cora Wong
- Copy Link
- Report Inappropriate Content
Hi Cora, have emailed you, check your inbox please.
If need more help, do not hesitate to contact us.
Have a nice day.
CWong wrote
Hello Kevin_Z,
Can you email me the downgrade procedures too?
I'm the 1.5.0 Version and having the same offline issue.
Many thanks,
Cora Wong
- Copy Link
- Report Inappropriate Content
Hello Kevin_Z,
Can you email me the downgrade procedures too?
I'm the 1.5.0 Version and having the same offline issue.
Many thanks,
Eric
- Copy Link
- Report Inappropriate Content
Hi Eric,
Have emailed you. Check your inbox please.
Good day.
Eric6642 wrote
Hello Kevin_Z,
Can you email me the downgrade procedures too?
I'm the 1.5.0 Version and having the same offline issue.
Many thanks,
Eric
- Copy Link
- Report Inappropriate Content
Hi Kelvin_Z,
could you send me the instructions to downgrade as well? Intermittent “Offline” though i hard reset camera, router, changed a new sd card as well.
My first security camera but very bad experience!
many thanks in advance!
Adam Ang
adamacy@hotmail.com
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 15756
Replies: 59
Voters 0
No one has voted for it yet.