TP-Link Community > Feature Requests > patrol and motion detection
< Feature Requests
 
0
Votes

patrol and motion detection

 
0
Votes

patrol and motion detection

patrol and motion detection
patrol and motion detection
2025-03-10 15:37:21
Tags: #Motion Detection #patrol
Model: Tapo C510W  
Hardware Version: V2
Firmware Version: 1.0.5

Hi,

i set my camera with 5 mark for patrol and activate it.

Also motion detection is active.

In this way happen,during the day with some cars on the street, that patrol does not move to mark ... i think because there are detection.

Is there any solution to give priority or reduce time from finish motion detected and start to patrol mark?

I am sorry for my english.

 

Thank you in advance

#1
Options
5 Reply
Re:patrol and motion detection
2025-03-11 11:28:47

  @nikti 

Hi,
Do you mean with your Detection and Patrol Mode settings on your camera, after the camera detects motion and finished motion detection, the camera won't start to patrol but will fix on the position it detects motion at all times?
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#2
Options
Re:patrol and motion detection
2025-03-11 13:37:15

  @Solla-topee 

 

No, i mean that there are many detections and the camera start to count 2 minute stop ad mark any time then it does not move.

I think 2 min for minimal stop is too high...but i cannot to start patrol to see the other zones.

 

Thank you

 

Nicola

#3
Options
Re:patrol and motion detection
2025-03-12 08:04:51

  @nikti 

Hi, 
Sorry that I may not fully understand your situation. The camera's Detection and Patrol mode are independent features, if your problem has relation to do with these two feature, please describe the steps to reproduce the issue for analysis.(You can use your language to describe the process.)

 

If you just want to reduce the Layover Time when configuring the Patrol mode, please feel free to let me know.

 

Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#4
Options
Re:patrol and motion detection
2025-03-12 16:14:12

  @Solla-topee 

Hi,

First step i would try to reduce layover time at 1 minute or 30 seconds.

 

Thank you

#5
Options
Re:patrol and motion detection
2025-03-13 06:56:10

  @nikti 

Hi, 
Thank you for your feature request to reduce the layover time to 1 minute or 30 seconds when configuring the camera's patrol mode. Our Tapo cameras do not support this feature now, but I'll log it and forward it to the relevant team for evaluation.
If other users have the same request, please vote on this thread and leave your usage scenario for evaluation.
Best Regards

>>Landscape Mode - Tapo App for Pad. >>Smart Action 2.0 Explore and meet the next level home automation. >>How to position my TP-Link camera for optimal performance.
#6
Options

Information

Helpful: 0

Views: 171

Replies: 5

Voters 0

No one has voted for it yet.

Tags

Motion Detection
patrol
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.