I have a storage facility with 3 separate buildings and have an issue I'm trying to resolve. I have 3 buildings all with outdoor EAP610s connected via mesh. The EAP610 on building 1 is hard wired to the router via a switch. Building 2 and building 3 EAP610s drop their connection within 60 minutes of me meshing them. The log shows no issues with Building 1s EAP610, but 2 and 3 drop connection usually in under an hour. Though after meshing them to building 1, building 2 and 3 connections work great for a while, until it drops the connection. I've tried meshing both 2 and 3 directly to 1, and I've tried meshing 3 to 2 and 2 to 1, with the same results. Distance is minimal between buildings, maybe 100ft. I've tried lowering the power on them to medium with no change in results.  These are managed with an OC200 controller.  When they disconnect they just go into an "isolated" status.