Problems with LAG between T1600G-28PS and SG3210XHP-M2
I'm trying to set up a 4 port LAG between these two switches.
On the T1600G-28PS I have 1GB SFP in ports 25-28 and I've linked these to ports 5-8 on the SG3210XHP-M2.
I've tried static LAG and LACP (with one end set to active and the other to passive) and in both cases I get ~12% packet loss on a simple ping test between the two switches.
All four patch cables test 100% OK on my Fluke CableIQ qualification tester.
I've also tried with and without flow control enabled but every time I get ~12% packet loss.
How do I get this to work reliably?
Any ideas?
Kind regards
John
Hi @johndpar
Thanks for posting in our business forum.
First, make sure both models are installed with the latest firmware.
Go to the global site and see if there is one for your models:
You see packets lost in the ping tests? Or how do you verify it?
If you reduce the LAG ports, will there be a difference?