Tapo C125 Status LED
I disabled Status LED in settings for C125 camera.
when the camera goes offline, because it doesn't reconnect to the router, then there is still fast blue Status LED blinking.
It drives me crazy when this happens at night, too bright and wakes me up.
Please update firmware to disable ALL Status LED codes if set to disabled.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi,
The System LED on the camera flashes blue quickly when the camera loses the WiFi connection with the router, which is to provide users with the camera status so that they can find the problem faster and restore the camera's network connection.
If you want the camera's System LED to be off all the time if set to disabled, it is recommended to post a thread on the Feature Request section to describe your usage scenario and request.
Best Regards
- Copy Link
- Report Inappropriate Content
Hi,
The System LED on the camera flashes blue quickly when the camera loses the WiFi connection with the router, which is to provide users with the camera status so that they can find the problem faster and restore the camera's network connection.
If you want the camera's System LED to be off all the time if set to disabled, it is recommended to post a thread on the Feature Request section to describe your usage scenario and request.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 134
Replies: 1
Voters 0
No one has voted for it yet.