how to stop the White light from blinking with any movement detection

how to stop the White light from blinking with any movement detection

how to stop the White light from blinking with any movement detection
how to stop the White light from blinking with any movement detection
2024-11-23 14:40:58 - last edited 3 weeks ago
Model: Tapo C425  
Hardware Version: V1
Firmware Version: 1.2.21

How to STOP the white light from blinking on any motion detection 

It's blinking all the time!. I don't want to see any lights; it's irritating 
With any small movement, the light will switch ON. I even changed the sensitivity 1 to 10 or 10 to 1 . Please inform me how to stop the lights on the motion detection



Signal Via White light active all the time (how to stop)

Signal Via White light active all the time (how to stop this)

 

 

light blinking with any movement white light from blinking on any motion detection 



if this is not solved, I will return the camera.

  0      
  0      
#1
Options
1 Accepted Solution
Re:how to stop the White light from blinking with any movement detection-Solution
2024-11-25 07:23:40 - last edited 3 weeks ago

  @YASSERETREBY 

Hi,
If the spotlight turns on when the camera detects an event at any time, it's possible that the Alarm feature on the camera is enabled.
Please go to the Tapo app > Camera's Device Settings > Alarm feature page to disable this feature for a try. 
If you prefer the camera to sound an alarm only when an event is detected, you can enable the Alarm feature but select "Sound only" on the Alarm Type page.
Best Regards

Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:how to stop the White light from blinking with any movement detection-Solution
2024-11-25 07:23:40 - last edited 3 weeks ago

  @YASSERETREBY 

Hi,
If the spotlight turns on when the camera detects an event at any time, it's possible that the Alarm feature on the camera is enabled.
Please go to the Tapo app > Camera's Device Settings > Alarm feature page to disable this feature for a try. 
If you prefer the camera to sound an alarm only when an event is detected, you can enable the Alarm feature but select "Sound only" on the Alarm Type page.
Best Regards

Recommended Solution
  0  
  0  
#2
Options