Tapo c225 keeps going offline

Tapo c225 keeps going offline

Tapo c225 keeps going offline
Tapo c225 keeps going offline
2 weeks ago - last edited a week ago
Model: Tapo C225  
Hardware Version: V2
Firmware Version: 1.0.11

My Tapo C225 camera keeps going off line, every day, making it pretty useless for home security.

The network is stable.  The WiFi (mesh network) pod is just 2 meters away!

The blue light is always flashing when it has a silicon sezure.

I have to flip the power to reset it every time, and no I don't want to have to reset the thing every time this happens!

There isn't a firmware update available, having already checked in the app.

This is really getting on my £<<"*>,^ />/@ !!! 😊

 

hardware v2

firmware 1.0 11

  1      
  1      
#1
Options
1 Accepted Solution
Re:Tapo c225 keeps going offline-Solution
2 weeks ago - last edited a week ago

  @Melon-Head 

Hi,
Typically, you can refer to the instructions below to troubleshoot the offline issue.
What should I do if my Tapo smart device keeps losing connection or going Offline?
 

1. Please send us the results after you follow the above tips to troubleshoot.
2. How many Wi-Fi pods do you have in your home network? Do they use the same SSID & password? 
3. Can you connect the camera to an AP/router with a different Wi-Fi name and check if the camera will work fine? I'm afraid the camera roams between the Wi-Fi pods since they use the same Wi-Fi settings, and then the disconnect issue occurs.

 

Best Regards

Recommended Solution
  0  
  0  
#2
Options
2 Reply
Re:Tapo c225 keeps going offline-Solution
2 weeks ago - last edited a week ago

  @Melon-Head 

Hi,
Typically, you can refer to the instructions below to troubleshoot the offline issue.
What should I do if my Tapo smart device keeps losing connection or going Offline?
 

1. Please send us the results after you follow the above tips to troubleshoot.
2. How many Wi-Fi pods do you have in your home network? Do they use the same SSID & password? 
3. Can you connect the camera to an AP/router with a different Wi-Fi name and check if the camera will work fine? I'm afraid the camera roams between the Wi-Fi pods since they use the same Wi-Fi settings, and then the disconnect issue occurs.

 

Best Regards

Recommended Solution
  0  
  0  
#2
Options
Re:Tapo c225 keeps going offline
13 hours ago

  @Melon-Head i had the same issue all my network devices at home in one mesh compatibility and all of them are tp link brand with wifi 6 certified: AX3000 4-Stream Wi-Fi 6  Router Extenders: RE600x and 605x  and the tapo c225 wi fi 6 advirtised i found the solution by disabling the smart connect feature in the main router and seperate 2.4 and 5Ghz wi fi names and connect my camera straight over 2.4Ghz and it never lost connection again. What means this? I can't get them work under one wifi name which one of the feature of wi fi six in one mesh. I think TP link either aren't aware of how their devices work buggy or they pretend they don't know what is going on. Those extenders are all in one mesh combility list yet they can't communicate without going buggy like dropping whats app calls during talk. it's a malfunction engineering.

  0  
  0  
#3
Options