0
Votes

Option: Recording the "reason" what triggered "record-video" on video.

 
0
Votes

Option: Recording the "reason" what triggered "record-video" on video.

Option: Recording the "reason" what triggered "record-video" on video.
Option: Recording the "reason" what triggered "record-video" on video.
2024-09-25 13:11:32 - last edited 3 weeks ago
Model: Tapo C320WS  
Hardware Version:
Firmware Version:

Option: Recording the "reason" what triggered "record-video" on video.

 

If using "motion detection" and do recording on event by linecrossing or motion or something else,

 

on playback you sometimes only can guess what was the triggered of the recording and in the opinion of the viewer what triggered the "false recording".


Please add a "mark trigger object on Video"-Option feature.

So one can activate it and than see, what's right or wrong and triggered the "record-video" event.

Then one can spare out the region with a Mask by hand or:

 

Better would be..

To spare an area out, one can select the "remove trigger in Zone/Area/Mask" if a trigger/trigger-area was shown in the video,

to automatically add a mask of that region (add or subtract from given Mask/Zone) to not activate false recordings.

(May be with the shape of the triggering object or just adjusted rectangle)

 

The best option would be:

Replay Videos and mark it as good or bad. Good is, you expected the videos to be recorded. Bad=you didnt expected it.

So the camera can compute what shouldnt trigger an event and substract it from recognition.

But i think the "best option" could not be realized with a small camera. idk.

 

I hope someone would like to have that feature too.

 

thank you

laugh

#1
Options
1 Accepted Solution
Re:Option: Recording the "reason" what triggered "record-video" on video.-Solution
2024-09-26 03:35:56 - last edited 3 weeks ago

  @Suess-Backe 

Hi,
On the camera's Live View page, turn on the Detection Tag feature, usually, you can see what event within the activity zone triggers the camera to record the video when watching the video stored on the SD card.
Best Regards

Recommended Solution
#2
Options
1 Reply
Re:Option: Recording the "reason" what triggered "record-video" on video.-Solution
2024-09-26 03:35:56 - last edited 3 weeks ago

  @Suess-Backe 

Hi,
On the camera's Live View page, turn on the Detection Tag feature, usually, you can see what event within the activity zone triggers the camera to record the video when watching the video stored on the SD card.
Best Regards

Recommended Solution
#2
Options