Power specification
Hello All,
Can anyone guide me, if I provide 12VDC with adequate current to TL-POE150S Injector that inturn POE connects to DMS camera, camera works on 12VDC. Does this setup work? Or 48V is must for operation of TL-POE150S?
Requesting your replies on urgent basis.
Thanks in advance.
Yadavrao.M
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Yadavrao
Thanks for posting in our business forum.
The PoE injector requires 48V DC input, then you should calculate the current and amp to meet the minimum output watt.
Recommend you use the original power adapter for the POE150S which should convert the power from your electrical meter to the proper power specs for the POE150S. The power adapter for our products should be 100-240V wide range power.
- Copy Link
- Report Inappropriate Content
Hi @Yadavrao
Thanks for posting in our business forum.
The PoE injector requires 48V DC input, then you should calculate the current and amp to meet the minimum output watt.
Recommend you use the original power adapter for the POE150S which should convert the power from your electrical meter to the proper power specs for the POE150S. The power adapter for our products should be 100-240V wide range power.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Yadavrao
Thanks for posting in our business forum.
Yadavrao wrote
But As per the spec and document of TL-POE150S, it says it'd work from an adapter, where as another model TL-POE24xxxx requires an 240V input cable from AC input. Am having 12VDC - 24VDC from the vehicle. Please guide how to implement to TL-POE150S.
You should check the power brick input, and if it is not AC, use a DC to AC converter so that you can use the power brick, then power brick powers up the networking device.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 312
Replies: 4
Voters 0
No one has voted for it yet.