Privacy zones C325WB
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
I defines some privacy zones on my C325WB camera. The camera picture where I define the privacy zone is wider thah the camera shows on LiveView. The Live View seems to be zoomed in. This cause problems with the definition of the privacy zones. The definiton that I made is shown in LiveView, but doesn't recognize the LiveView picture.
The camera has no possibility to zoom in or zoom out, so the definition is very difficult to do.
Does anybody knows what the problem is?
Hello Wayne,
Thanks for your reply.
At the left the screen to set the detection zones. That is a different picture than the screen at the right. Right is the normal screen as expected. The C325WB doesn't have zoom function. If I define the detection zones, I have to do the definitiions on the left, but after defining I see the picture on the right. The definitions stay the same, but is put on the right.
How come that the camera shows the picture on the left? That is more than I see on the right.
I solved the problem by try and error until it matched my wishes.
Do I overlook something?
