How to allow access from a network to a IP-adress (server)
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hello!
I have a network Network called "CCTV" which is where all my cameras are in. Now I have a FTP server in a network called "TECH" and I want to set the FTP server in the cameras so the record on the FTP server. But now the Problem: I have an ACL which blocks the acces of "CCTV" to "TECH", so that also affects the FTP server. How do I allow the "CCTV" network to acces the FTP server with only the gateway?
Many thanks in advance
Greetings Colin
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Colinu
Thanks for posting in our business forum.
Colinu wrote
Hello, thanks for your reply! I have tried that already but I don't find a way to set up this ACL as a Gateway ACL. But I have to do it as a Gateway ACL because I only havet the gateway and a Acces point in this network. Greetings Colin
Unfortunate that the GW ACL does not support IP-Port Group yet.
If you have to use it now, either to get a switch or try to set it up in standalone mode where you can set up the Service Type yourself.
This IP-Port Group in GW ACL has been submitted to the dev and will come out in the future.
- Copy Link
- Report Inappropriate Content
Hi @Colinu
Thanks for posting in our business forum.
Set up another ACL to allow the access then. SRC and DST based on your plan. You should use set Service as FTP or specify the IP-Port group.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Hi @Colinu
Thanks for posting in our business forum.
Colinu wrote
Hello, thanks for your reply! I have tried that already but I don't find a way to set up this ACL as a Gateway ACL. But I have to do it as a Gateway ACL because I only havet the gateway and a Acces point in this network. Greetings Colin
Unfortunate that the GW ACL does not support IP-Port Group yet.
If you have to use it now, either to get a switch or try to set it up in standalone mode where you can set up the Service Type yourself.
This IP-Port Group in GW ACL has been submitted to the dev and will come out in the future.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 1
Views: 364
Replies: 3
Voters 1