The downlink AP number of the uplink AP has reached the limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

The downlink AP number of the uplink AP has reached the limit

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
The downlink AP number of the uplink AP has reached the limit
The downlink AP number of the uplink AP has reached the limit
2023-11-26 02:23:22 - last edited 2023-11-30 08:01:46
Model: EAP610-Outdoor  
Hardware Version:
Firmware Version:

I tried to set up a star topology today with more than 4 downlink mesh AP's, and got the error message: The downlink AP number of the uplink AP has reached the limit. Is there some way around this without introducing another hop? T

  0      
  0      
#1
Options
1 Accepted Solution
Re:The downlink AP number of the uplink AP has reached the limit-Solution
2023-11-26 16:02:29 - last edited 2023-11-30 08:01:46

  @dononeil 

 

Two ways I can think of:

 

1. Add another root AP

2. Back to back two AP's in the field with a cable.  You can take that opportunity to set the slave AP's 5.8G freq to a different one to improve overall performance

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:The downlink AP number of the uplink AP has reached the limit-Solution
2023-11-26 16:02:29 - last edited 2023-11-30 08:01:46

  @dononeil 

 

Two ways I can think of:

 

1. Add another root AP

2. Back to back two AP's in the field with a cable.  You can take that opportunity to set the slave AP's 5.8G freq to a different one to improve overall performance

<< Paying it forward, one juicy problem at a time... >>
Recommended Solution
  0  
  0  
#2
Options