Tapo TC70 blinks in red from time to time
Hello,
The camera is working fine but I noticed that it blinks in red from time to time.
What does it mean?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hello, @Solla-topee,
There is no explanation in the UG regarding slow blinking red. As I said, it's blinking red from time to time.
I followed your instructions. The camera was powered down for 10 minutes. I powered it on, it calibrated itself and it now shows solid green.
I can control the camera through mobile data.
So far I haven't noticed any new blinking of the red LED.
- Copy Link
- Report Inappropriate Content
Hi,
You can refer to the UG to see the meaning of the LED status on the camera.
Please help confirm the following information about the reported issue.
1. If you have not tried to reboot the camera, please turn it off, wait for two minutes, turn it back on, and check if the LED will show the correct status.
2. Can you control the camera when your phone is disconnected from Wi-Fi and use mobile data?
3. If reboot does not solve the issue, please try to reset the camera to factory default settings, reconfigure it, and check if the camera LED status is correct. Please describe the LED changes in this process if possible.
How to reset my Tapo camera?
Best Regards
- Copy Link
- Report Inappropriate Content
Hello, @Solla-topee,
There is no explanation in the UG regarding slow blinking red. As I said, it's blinking red from time to time.
I followed your instructions. The camera was powered down for 10 minutes. I powered it on, it calibrated itself and it now shows solid green.
I can control the camera through mobile data.
So far I haven't noticed any new blinking of the red LED.
- Copy Link
- Report Inappropriate Content
Hi,
Thank you for the updates, and you can keep monitoring the camera status. Please feel free to contact us if you need any further help.
Best Regards
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 672
Replies: 3
Voters 0
No one has voted for it yet.