Home

Forums

Stories

Knowledge Base

Business Community > WiFi > Omada eap225 Mesh Network

< WiFi

Omada eap225 Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Omada eap225 Mesh Network

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Sammy07

2022-09-01 06:01:56

Posts: 1

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2022-09-01

Omada eap225 Mesh Network

2022-09-01 06:01:56

Tags: #Mesh #Roaming #EAP ACL

Model: EAP225

Hardware Version: V4

Firmware Version: 5.08

Hi,

I recently installed Omada eap225 at home using the software controller on my laptop.

I noticed the controller in the sitting room has a poor speed when it is connected directly to the LAN through the data port, but the speed is better when it is disconnected and operating in Mesh mode.

Do I need to disable Mesh for the eap225 to perform better when connected through the data port?

2 Reply

Philbert

LV5

2022-09-01 19:46:14

Posts: 2607

Helpful: 1544

Solutions: 273

Stories: 0

Registered: 2020-11-08

Re:Omada eap225 Mesh Network

2022-09-01 19:46:14

@Sammy07

Hey

Would it be possible you could post a screen shot of what you are seeing? Usually the LAN port is much faster than the mesh so should be preferable.. however there could be other things at play

If you can post a few screenshots we can take a look for you

Philbert

Somnus

LV5

2022-09-02 09:54:21

Posts: 1212

Helpful: 219

Solutions: 72

Stories: 0

Registered: 2021-06-14

Re:Omada eap225 Mesh Network

2022-09-02 09:54:21

@Sammy07

Have you checked the Internet speed from your LAN Ethernet connection? Maybe it's just Ethernet speed not good.

And you can try to disable 2.4Ghz, only use 5Ghz SSID. If you are connected to 2.4Ghz, the speed performance will be limited.

Omada eap225 Mesh Network

Omada eap225 Mesh Network

Information

Voters 0

Tags