Make devices connect to the best EAP
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Hi
What are the best settings to use so devices in hard to reach areas connect to the eap that has the best signal?
Cause as things stand right now I am having devices who are not connect to the eap which is the closest to them, thus not getting the best connection
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hey
Are you using a OC200 or Software Controller to manage the APs? If so try enabling FAST ROAMING under site settings, this will add 802.11K/V - K will aid in roaming schedule when signal or quality can be improved by moving AP.
If the devices are standalone you would be better setting a force disconnect policy when the SNR gets to a certain level, say -80db. This would however need to be done on each AP seperately
- Copy Link
- Report Inappropriate Content
@Philbert Thanks for your help
I am using OC200 and all devices are managed by it
Fast roaming is activated - i have not activated force dissociation however
- Copy Link
- Report Inappropriate Content
I would recommend turning Forced Dissocation ON.. This will remove the clients ability to choose when it roams and allow the controller to force it.
As a rule of thumb, client will hold onto one AP until the last breath so forcing their hand is a good option. However not all clients support this so non-supporting clients will continue to do their own thing.. but generally better have this enabled
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 1712
Replies: 3
Voters 0
No one has voted for it yet.