Join 2x Network /building with 2x CPE210?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Join 2x Network /building with 2x CPE210?

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Join 2x Network /building with 2x CPE210?
Join 2x Network /building with 2x CPE210?
2020-12-09 07:13:19
Model: CPE210  
Hardware Version:
Firmware Version:

We have 2 office: room #1 & room #2.

 

Both room have 1 internet modem router (huawei)

 

we want to join network of room #1 and room #2 wirelessly,

so computer in room #1 can ping IP of computer in room #2

 

example:

room #1 (huawei modem router)  ----- ethernet wire ---- TP Link CPE210 #1   

**** wireless ***

TP Link CPE210 #2 ---- ethernet wire --- room #2 (huawei modem router)

 

is it possible???

  0      
  0      
#1
Options
1 Reply
Re:Join 2x Network /building with 2x CPE210?
2020-12-09 12:07:04 - last edited 2020-12-09 12:14:14

Dear @fatjoez,

 

we want to join network of room #1 and room #2 wirelessly,

so computer in room #1 can ping IP of computer in room #2

 

example:

room #1 (huawei modem router)  ----- ethernet wire ---- TP Link CPE210 #1   

**** wireless ***

TP Link CPE210 #2 ---- ethernet wire --- room #2 (huawei modem router)

 

is it possible???

 

2 of CPE can build a wireless bridge between the two rooms.

 

But if you want the computers can communicate with each other, it's better to get the modem router in room #2 to work as an AP instead of a router, in this way, all devices work in a same LAN network. Otherwise, you may need to open ports on both routers to allow communication from two different LAN networks.

>> Omada EAP Firmware Trial Available Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options