Background: This post provides a configuration guide to set up QoS on Omada Switch for Dante and voice-related protocols. This Article Applies to: Omada switches with the QoS feature. L2+ and L3 Switc

I see several feature requests relating to WPA3, but none that appear to address this particular issue. I recently replaced an EAP235-Wall Access Point with an EAP615-Wall Access Point to get roaming

I have a system with 5 EAP access points covering a fairly large area. I have two EAP245s, an EAP225, an EAP225-Outdoor, and I once had an EAP235-Wall covering the far end of the space. The wall unit

Latest Firmware Release > Early Access < Omada_SDN_Controller_v5.15.6.4 Windows (Windows 7/8/10/11/Server, 64bit Recommended) Omada_SDN_Controller_v5.15.6.4_linux_x64.tar Omada_SDN_Controller_v5.15.6.

After upgrading my Controller to v5.0.30 everything appeared to be working normally, until a brief power failure at one of my EAP245s caused it to reboot. At this point it appeared in the Devices list

I noticed Omada Controller 5 has been available for download for a few days now for Windows, any idea when the Linux version will be out? Also the android app doesnt seem to have been updated with com