guyd2LV2Online
Following: 0Followers: 0
Forums/ Controllers
By guyd2 2024-08-29 17:34:58

VLAN configuration

Hi, Hardware: Router 605 Switch : SG2428P v5.20 Controller: OC200 (cant see its hardware/ firmware versions). I have 3 Vlans: 1. Infrastructure: VLAN_1 2. PCs: VLAN_10 3. CAM: VLA_20 4. IoT: VLAN_30 W
Forums/ Switches
By guyd2 2024-08-25 11:23:24

VLANs Error

I created 2 VLANs: 1. IoT - Vlan30. 2. PCs - Vlan20 VLan 1 -Default is only for my infrastructure hardware. WDCloud, Vlan10 - 192.168.10.3 my Promox server is at VLAN-1. 192.168.0.11 * VM inside proxm
Forums/ Switches
By guyd2 2024-08-19 04:29:44

Connection indicates as 100Mb instead 1000Mb

Hi, I pulled CAT7 cables in my new house. All checked that using a ping tool that indicated that pinout is good. I have a 265HD Wifi device that works OK, powered using POE. when it conneted to Switch
Forums/ Switches
By guyd2 2024-03-24 16:47:18

Omada Mesh :: Connecting a specific Vlan

Hi, This is my hardware setup: ER605, OC200, SG2428P, and some AP. Topology: 1. In-house, I have the hardware setup defined above. 2. Office is remote to my house. I wish to connect my office desktop
Forums/ Switches
By guyd2 2024-03-24 16:23:53

ACL - Allowing one port access a blocked VLAN

Hi, My hardware setup: ER605, OC200, SG2428P, and some AP. I created few VLANs, that seems to work fine ( ADMIN, CAM, IOT, PC). An ACL was created to block any communication from all othen VLANs. But,
Forums/ Switches
By guyd2 2024-03-10 18:35:32

What is the meaning of toggle/ enable VLANs

Hi, This is my hardware setup: ER605, OC200, SG2428P, and some AP. I started to play arround with VLANs- I created 4 instances as part of understanding the use of it. There are some great tutorials on
12