LiftboyLV2Online
Following: 1Followers: 0
Forums/ WiFi
By Liftboy Yesterday

Drucker an LAN des AP's

Moin moin! Ich nutze diverse AP's im Omada Verbund. Einer davon (EAP650) hat einen Drucker neben sich stehen, der per LAN mit dem AP verbunden ist.Der AP ist wireless (Mesh) mit einem weiteren verbund
Forums/ WiFi
By Liftboy 2024-10-23 06:19:25

slow RX speed - Firmware EAP650, Mesh, Optimization ?

Hello and good day! I am using a: ER707-M2 v1.0 SG3210X-M2 v1.0 several EAP650 EAP 610 outdoor etc. with a controller 200 My problem is that the download speed of the EAP650 has probably dropped signi
Forums/ WiFi
By Liftboy 2024-03-20 09:18:07

speed problem WLan

Hello! The data throughput in the WLAN is somehow limited in my network. For example, when I do a WiFi speed test with different devices in the immediate vicinity of the wired AP, I usually only get b
Forums/ Routers
By Liftboy 2023-12-20 17:34:48

instead an 707 a 8411 - what to do

Hello, I am currently using an ER707-M2 to get DSL and fibre optics via WAN into the network. Behind it is a NAS (2.5GB) and a switch with various APs (650). The switch is from Netgear and has one 2.5
Forums/ Routers
By Liftboy 2023-12-14 16:44:48

Phone behind router

Hello! I use an ER707M2, an OM200 and various APs. A Fritzbox, which only has DECT active, will be used for telephony. This worked for a short time and then the O2 SIP numbers in Germany could no long
Forums/ WiFi
By Liftboy 2023-12-14 13:42:37

repeater mode for printer

Hello! I need to supply a printer at one point. I have used an EAP 650 for this and operated it in repeater mode. Unfortunately, the LAN port cannot be used for the printer. Then I took a 610 wall, as
12